What is the bolt pattern for a Ford F250?
The Ford F-250 Super Duty typically uses an 8-lug wheel pattern on a 170‑millimeter bolt circle (8x170 mm), which is about 6.69 inches. This article explains what that means, how it’s measured, and how to verify the exact specification for your specific year and configuration.
Bolt pattern basics for the Ford F-250
The bolt pattern, or bolt circle diameter (PCD), describes how many lug holes a wheel has and the diameter of the circle those holes form. For the Ford F-250 Super Duty, the standard configuration on most single-rear-wheel (SRW) trucks is 8 lugs on a 170 mm bolt circle. While this pattern covers the vast majority of recent F-250s, there can be year-to-year differences or special editions, so it’s always best to confirm for your exact vehicle.
Key specifications to know when shopping for wheels, adapters, or replacements:
- Pattern: 8x170 mm (8 lug holes on a 170 mm bolt circle; about 6.69 inches).
- Center bore: 126.0 mm (the hole in the hub that centers the wheel).
- Lug type: standard for Ford Super Duty trucks; verify whether your vehicle uses wheel studs or lug nuts configured for this pattern.
- Typical applicability: most SRW Ford F-250 Super Duty models from the late 1990s through recent years.
Bottom line: the standard bolt pattern is 8x170 mm for the majority of Ford F-250 SRW trucks. Always verify for your exact model year and wheel type before purchasing replacements or accessories.
How to confirm the bolt pattern on your specific truck
To be certain about your individual vehicle, use these verification methods. Each can help ensure you don’t buy the wrong wheels or adapters.
- Check the door placard on the driver’s side jamb for wheel and lug pattern information.
- Inspect the wheel hub or the imprint on the factory wheel itself for the bolt circle size and number of lugs.
- Consult the owner’s manual or the Ford dealer’s VIN-based build sheet, which lists the exact bolt pattern for your truck’s configuration.
- If needed, measure manually: across from center of two opposite lug studs, then convert the measurement to the bolt circle diameter (PCD).
If you still aren’t sure after these checks, contact a Ford dealer or a reputable tire/wheel shop with your VIN for a definitive confirmation.
Summary
For most Ford F-250 Super Duty trucks, the standard bolt pattern is 8x170 mm (8 lugs on a 170 mm bolt circle, about 6.69 inches) with a 126.0 mm center bore. Verify this specification for your exact year, trim, and wheel configuration using your door placard, manuals, dealer resources, or VIN lookup, especially if you’re dealing with a DRW (dually) variant or a nonstandard edition. Accurate confirmation helps ensure correct fitment and safe, reliable performance.
What is the bolt pattern on a 2006 Ford F250?
The 2006 Ford F-250 lug pattern is 8x170mm. This means there are 8 lug holes on an imaginary circle with a diameter of 170 millimeters.
- Bolt Pattern: 8x170mm
- Bolt Circle: 6.69 inches
- Lug Holes: 8
- Hub Bore: 124.9mm
What is the bolt pattern on a Ford F250?
The bolt pattern for most Ford F-250 trucks from 1999 to the present is 8x170mm. This is an 8-lug pattern with a 170mm bolt circle diameter. Older models, like the 1994-1997 F-250, use an 8x6.5 bolt pattern.
This video explains the wheel offset for a 2011-2016 F-250/F-350: 24sCustom OffsetsYouTube · Sep 19, 2025
- Modern F-250s (1999-present): Use an 8x170mm bolt pattern.
- Older F-250s (1994-1997): Use an 8x6.5 bolt pattern.
- Single Rear Wheel (SRW) vs. Dual Rear Wheel (DRW): For modern F-250s, the SRW models use the 8x170mm pattern, while DRW models have a different pattern (8x200mm).
- Center Bore: All F-250 Super Duty models from 1999 to the present have a 124.9mm center bore.
What is the bolt pattern on a 2004 Ford F250?
The 2004 Ford F-250 Super Duty has a 8x170mm bolt pattern. This means there are 8 lug holes on an imaginary circle with a diameter of 170 millimeters.
You can watch this video to learn how to find your wheel bolt pattern: 37sRealTruck.comYouTube · Mar 20, 2017
- Bolt pattern: 8x170mm
- Hub bore: 124.9mm
- Years covered: This bolt pattern is consistent across the Super Duty line from 1999 to 2007.
What trucks use the 8x6.5 bolt pattern?
Popular vehicles that use the 8x165. 1 / 8x6. 5 bolt pattern include: Chevrolet Express 2500, Chevrolet Express 3500, Chevrolet Suburban 2500, Dodge Ram 2500, Dodge Ram 3500, Ford E-150, Ford E-350 Super Duty, GMC Savana 2500, GMC Savana 3500, GMC Yukon XL 2500, Nissan NV1500, Nissan NV2500, and Nissan NV3500.
