What is the bolt pattern on a 05 charger?
The 2005 Dodge Charger uses a 5-lug bolt pattern on a 115 mm bolt circle (5x115). This means five lug holes arranged on a circle 115 millimeters in diameter. This setup is standard across most early LX-era Chargers. The following sections explain how to verify this on your car and what to consider for wheel compatibility.
Bolt pattern specifics for the 2005 Charger
In practical terms, the Charger from the 2005 model year typically features five lug holes arranged on a 115 mm (4.53 inches) bolt circle. This 5x115 pattern is common among Dodge and Chrysler vehicles from the same era, which helps guide wheel and accessory compatibility.
How to verify your bolt pattern
Use these steps to confirm the pattern on your specific car before buying wheels or adapters:
- Check the owner’s manual or the tire/wheel information sticker on the door jamb for wheel bolt-pattern data.
- Inspect the wheel itself or the hub area for a stamped bolt-pattern designation.
- Measure the lug holes and calculate the bolt circle diameter: measure from the center of one lug hole to the center of the opposite lug hole across the wheel. If the measurement is about 115 mm, the pattern is 5x115.
- Consult the VIN, the dealership, or a trusted wheel-fitment database to confirm compatibility with your exact trim and production year.
When verifying, keep in mind that you are confirming the bolt pattern, not other specifications such as center bore or wheel offset, which are separate considerations for fitment.
Conclusion: The bolt pattern for the 2005 Charger is 5x115, and verifying via official documentation or a reputable source helps ensure correct wheel compatibility.
Wheel compatibility notes
Beyond the bolt pattern, other factors affect wheel fitment, so consider these notes when shopping for wheels or tires for a 2005 Charger:
- Most wheels designed for 5x115 bolt circles that fit Dodge Charger and Chrysler 300 will fit, provided the center bore and offset are appropriate for your vehicle.
- Directly substituting wheels from vehicles with a different bolt pattern (for example, 5x114.3) is not compatible without adapters, which can impact safety and alignment.
- Center bore and hub-centric design matter for smooth mounting and vibration control; check that the wheel’s hub bore matches or you use appropriate spacers or adapters as recommended by a professional.
Bottom line: The 2005 Dodge Charger uses a 5x115 bolt pattern, and most compatible wheels from Mopar platforms or aftermarket suppliers designed for 5x115 will fit when other specifications align.
Summary: For the 2005 Dodge Charger, the bolt pattern is 5 lugs on a 115 mm circle (5x115). Verify with your vehicle’s documentation or a trusted parts source, and consider center bore and offset to ensure proper wheel fitment.
