What is the bolt pattern on a 1984 Dodge Ramcharger?
The common bolt pattern for a 1984 Dodge Ramcharger is 5x5.0 inches (five lugs on a 5.0-inch circle).
In practice, the Ramcharger from that era is based on Dodge’s D-Series truck platform, and the 5x5.0 pattern is typical for most 1984 models. However, there can be variations due to specific axles, trim levels, or aftermarket modifications, so it’s prudent to verify the exact pattern on your vehicle before purchasing wheels or adapters.
Understanding what the bolt pattern means
The bolt pattern, sometimes called lug pattern or bolt circle, determines which wheels will fit your vehicle. For a 5-lug Ramcharger of this vintage, five studs are arranged on a circle with a 5.0-inch diameter, and the wheels chosen must match this specification to mount correctly and safely.
How to confirm the bolt pattern on your Ramcharger
To confirm the bolt pattern on your specific vehicle, measure directly or consult the owner's manual or a reliable parts catalog. Follow these practical steps:
- Count the number of lug holes on the wheel hub to confirm there are five lugs.
- Measure the bolt circle diameter by drawing an imaginary line through the centers of opposite lug holes and measuring the distance between them. If the measurement is approximately 5.0 inches, the pattern is 5x5.0.
- Cross-check the vehicle's documentation, build sheet, or a reputable parts supplier to confirm the pattern for your exact model and axle configuration.
- Be aware of any aftermarket alterations, such as different axles or spacers, that could change fitment from the stock pattern.
- If you’re unsure, bring a known-good wheel or hub to a tire shop or parts counter to verify compatibility.
Accurate verification helps ensure wheels and tires mount safely and perform as intended, without the need for modifications.
Additional considerations
While the 5x5.0 bolt pattern is typical for many 1984 Ramchargers, other fitment factors—such as wheel offset and center bore—can affect how a wheel sits on the hub. Always check these specifications when selecting aftermarket wheels or evaluating adapters.
Summary
The 1984 Dodge Ramcharger most commonly uses a 5x5.0 bolt pattern. Confirm the exact pattern on your specific vehicle by measuring the lug circle or consulting official documentation, and consider offset and other wheel specifications to ensure proper fitment.
What Dodge trucks have a 5X5 5 bolt pattern?
Bolt Pattern Chart
| TRUCK | YEAR | BOLT CIRCLE |
|---|---|---|
| Dodge Ram 1/2-ton Pickup | 06-11 | 5X5.5 |
| Dodge Ram 1/2-ton Pickup | 12-13 | 5X5.5 |
| Dodge Ram 1/2-ton Pickup | 14-18 | 5X5.5 |
| Dodge Ram 1/2-ton Pickup | 19-Current | 5X5.5 or 6X5.5 |
How much is a 1984 Dodge Ramcharger worth?
Typically, you can expect to pay around $18,167 for a 1984 Dodge Ramcharger Royal SE in good condition with average spec.
What is the wheel bolt pattern for a 1986 Dodge Ramcharger?
Dodge Ramcharger Wheels | 1980-1993 | 5 Bolt. BB Wheels offers a full lineup for sale online of 1980 - 1993 Dodge Ramcharger rims in many sizes such as 15", 16", 17", 18", 19", 20", 22", and 24" in the 5x5. 5 (5x139. 7) bolt pattern.
Are 4x4 and 4x100 the same bolt pattern?
No, a 4x4 bolt pattern is not the same as 4x100; a 4x4 pattern is approximately $101.6$mm, while a 4x100 pattern is metric. While they are close, the $1.6$mm difference in the diameter makes them incompatible and they should not be interchanged, as it can cause stress on the studs and lead to failure.
- 4x4 bolt pattern: This is a measurement in inches, which translates to approximately $101.6$mm.
- 4x100 bolt pattern: This is a metric measurement and is exactly $100$mm.
- Difference: The difference is about $1.6$mm. This small difference is significant enough that wheels and hubs with these patterns are not directly interchangeable.
- Consequences of mixing: Forcing a wheel with a 4x100 bolt pattern onto a 4x4 hub (or vice versa) can cause the studs to bend and break.
- Solution: If you need to use wheels with a different bolt pattern, you must use adapters or spacers that are specifically designed to convert one pattern to the other.
