What is the bolt pattern on a 2007 Honda Accord?
The bolt pattern is 5x114.3 mm (five lug holes on a 114.3 mm circle).
In more detail, the 2007 Honda Accord (seventh generation) uses a 5-lug pattern with a 114.3 mm bolt circle, a center bore of 64.1 mm, and lug nuts sized M12x1.5 with a conical seat. This setup is consistent across most trims, but always confirm with the specific wheel or aftermarket option you’re considering, especially if you’re using spacers or hub rings.
Wheel mounting specifications
Key specifications you should know when shopping for wheels or tires include the following:
- Bolt pattern: 5 on 114.3 mm (5x114.3)
- Center bore: 64.1 mm
- Lug nut size and seat: M12x1.5 with a conical (60-degree) seat
- Offset considerations: OEM wheels typically require a modest positive offset (around +40 to +50 mm on many rims); verify the exact spec for your chosen wheels
Understanding these specifications helps ensure proper fitment, alignment, and braking clearance. When in doubt, confirm by checking the wheel manufacturer’s spec sheet or consulting a professional installer.
Additional considerations for fit and safety
Beyond the basic pattern, consider hub-centric fit, rotor clearance, and tire size compatibility. If you’re mixing wheels from different years or after-market options, you may need hub rings, spacers, or professional guidance to maintain safety and performance.
Summary
The 2007 Honda Accord uses a 5x114.3 mm bolt pattern with a 64.1 mm center bore and M12x1.5 lug nuts with a conical seat. This configuration is standard for most trims of this generation, but always verify exact wheel specifications for your vehicle and any aftermarket wheels to ensure a proper, safe fit.
What is the bolt pattern for a 2007 Honda Accord?
This Factory OEM Honda rim comes equipped on a 2006-2007 Honda Accord. This is an aluminum wheel with a diameter of 17" and a width of 6.5". This Honda Accord wheel has 5 lug holes and a bolt pattern of 114.3mm.
Can I put 5W-30 instead of 5W-20 on a Honda Accord?
You can likely use 5W-30 instead of 5W-20 in your Honda Accord, but you should check your owner's manual first, as the recommended oil can vary by model year and engine. Using a slightly thicker oil is sometimes done for older or high-mileage engines, but it may slightly decrease fuel economy, as the lighter 5W-20 is often specified for better efficiency.
Potential effects of using 5W-30
- Fuel economy: Thicker oil requires more energy to pump, which can lead to a slight reduction in gas mileage.
- Engine performance: Engineers design engines for specific oil viscosities. Sticking to the recommended 5W-20 ensures optimal performance and protection according to the manufacturer's specifications.
- Engine wear: In some cases, using a heavier oil in a high-mileage engine might be beneficial, especially if you're experiencing oil consumption issues. Some mechanics recommend a 5W-30 in older Honda engines to help with this, but it can also increase engine friction if the engine wasn't designed for it.
What to do
- Check your owner's manual: The most important step is to consult your car's owner's manual for the exact oil viscosity recommendation for your specific model and engine.
- Consult a mechanic: If you're concerned about your engine's performance or have a high-mileage vehicle, a mechanic can provide advice tailored to your car's condition.
What Honda has a 4x100 bolt pattern?
Compatibility and Suitability: The 4x100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City.
What is the bolt pattern on a 5 lug Honda Accord?
The 5-lug bolt pattern for a Honda Accord is 5x114.3mm, which is also commonly referred to as 5x4.5 inches. This pattern has been used for most 5-lug Accords since the late 1990s, including model years from 1998 through the present.
You can watch this video to learn how to measure the bolt pattern of a wheel: 56sR3 Viddy ProductionsYouTube · Sep 24, 2012
- Bolt Pattern: 5×114.35 cross 114.35×114.3 mm or 5×4.55 cross 4.55×4.5 inches.
- Model Years: Generally applies to 1998-present models with a 5-lug configuration.
- Verification: It is always recommended to double-check the specific bolt pattern for your vehicle's year and trim to ensure proper fitment.
