How long is the Toyota Mark 2?
The length of a Toyota Mark II depends on its generation and market. Across its production span, exterior lengths typically range from about 4.6 meters to just over 5 meters. For a precise figure, you’ll need the exact year and market of the car.
Generational overview and typical lengths
Below is a general guide to approximate exterior lengths by major Mark II generations. These figures are approximate and can vary by trim level, wheel choices, and regional specifications.
- First generation (roughly 1968–1972): about 4,580–4,660 mm (179.9–183.5 in)
- Second generation (roughly 1972–1976): about 4,670–4,720 mm (183.9–186.0 in)
- Third generation (roughly 1976–1980): about 4,700–4,900 mm (184.6–193.7 in)
- Fourth generation (1980s–early 1990s): about 4,930–5,010 mm (194.0–197.6 in)
- Fifth generation and later variants (mid-1990s–early 2000s): about 4,950–5,040 mm (194.9–198.5 in)
In short, the Mark II's length increased modestly over time as styling and safety/comfort features expanded. For a specific car, confirm the exact measurement from the manufacturer’s specifications or the vehicle’s VIN-based documentation.
Market differences and verification tips
Because the Mark II name was used across multiple markets—including Japan, North America, and Australia—the exact exterior length can vary even within the same generation. Some regions used variants marketed under the Cressida or Crown lines, which can also affect overall length.
How to verify the exact length for a specific car
To obtain the precise exterior length for a particular Mark II you own or intend to buy, try these steps:
- Check the official brochure or owner's manual for the exact year and market.
- Look up the chassis code (VIN) and search Toyota's archived specs for that code.
- Measure bumper-to-bumper with the car on level ground if you have access to the vehicle.
These steps help ensure you have the correct measurement for the exact model in question.
Summary
The Toyota Mark II does not have a single fixed length; it spans several generations with varying dimensions. Expect roughly 4.6 to 5.0 meters depending on year and market, and verify the exact figure for the specific car you are researching or purchasing.
What are the Mark II's dimensions?
Toyota Mark II Specifications
The Mark II car has a fuel average of KM/L with a fuel tank capacity of 70L. With the dimensions of 4735 mm in length, 1760 mm in width, and 1460 mm in height ,the Mark II has a seating capacity of 5 persons.
How long is a Toyota MR2?
The length of a Toyota MR2 varies by generation: the first generation (1985–1990) is about 154.3 inches (3919 mm) long, the second generation (1989–1999) is approximately 164.2 inches (4170 mm) long, and the third generation (2000–2007) is about 153.5 inches (3899 mm) long.
- First generation (1985–1990): 154.3 inches (3919 mm)
- Second generation (1989–1999): 164.2 inches (4170 mm)
- Third generation (2000–2007): 153.5 inches (3899 mm)
What is the length of a Toyota Landcruiser?
The length of a Toyota Land Cruiser varies by model year, but the 2024 model is 193.8 inches long, while the 2025 model is 196.4 inches long. Other Land Cruiser models can range from approximately 160 to over 206 inches in length, depending on the specific version, notes Wikipedia.
Current models
- 2024 Toyota Land Cruiser: 193.8 inches
- 2025 Toyota Land Cruiser: 196.4 inches
Other models
- Land Cruiser 1958 (2025): 196.4 inches
- Other Land Cruiser models: The length varies from approximately 160 inches to 206 inches depending on the model and trim. For example, some older models, like the 2021 Australian version, were up to 5220 mm (205.5 inches) long, according to CarsGuide.
How much is a Toyota Mark 2 worth?
Q: What is the lowest sale price of a Toyota Mark II? A: The lowest recorded sale price was $5,555 for a 1997 Toyota Mark II Grande on Aug 15 2023. Q: What is the average sale price of a Toyota Mark II? A: The average price of a Toyota Mark II is $12,313.
