What is the bolt pattern on a 2008 F250?
The bolt pattern on the 2008 Ford F-250 Super Duty is 8x170 mm (eight lug holes on a 170 millimeter circle), which is about 6.69 inches across. This is the standard setup for the heavy-duty Super Duty lineup from that era.
Bolt pattern basics
Understanding the pattern helps you determine wheel compatibility. The 2008 F-250 uses eight lug studs arranged around a 170 mm circle. This pattern is typically written as 8x170 or 8x6.69 in, and it is common across Ford’s Super Duty family, including F-250, F-350, and F-450 models from roughly the late 1990s onward. Always verify for a specific build or aftermarket part.
Key technical details you should know before shopping for wheels are below:
- Lug count: 8
- Bolt circle diameter: 170 mm (6.69 inches)
- Common across the Ford Super Duty lineup (F-250, F-350, F-450) for the corresponding era
- Not interchangeable with lighter-duty 6-lug patterns used on the F-150 and some other models
With these basics in mind, you can focus on other wheel specifications like center bore, offset, and hub compatibility when making a selection.
How to verify the bolt pattern on your vehicle
If you’re unsure whether a wheel will fit your 2008 F-250, use these quick verification steps to confirm the pattern before purchasing.
- Check the owner’s manual or the driver’s door placard for wheel and lug specifications.
- Count the lug studs and measure the distance across the circle from one lug center to the opposite lug center to confirm 170 mm (6.69 in).
- Compare the wheel or hub to a known 8x170 pattern or consult the manufacturer’s fitment chart for your VIN.
- When in doubt, consult a dealer, a reputable tire/wheel shop, or the manufacturer to confirm compatibility.
Correctly confirming the bolt pattern ensures safe installation and proper tire performance.
Summary
The 2008 Ford F-250 Super Duty uses an 8x170 mm bolt pattern (eight lugs on a 170 mm circle). This pattern is characteristic of the heavy-duty Ford Super Duty line from that era and is a key factor when selecting wheels or aftermarket replacements. Always verify hub bore and offset alongside the bolt pattern to ensure a proper, safe fit.
What is the bolt pattern on a 2008 Ford f250?
The bolt pattern for a 2008 Ford F-250 is 8x170mm. This indicates there are 8 lug holes, and the imaginary circle they form has a diameter of 170 millimeters.
- Bolt pattern: 8x170mm (also expressed as 8x6.69 inches)
- Lug holes: 8
- Center bore: 124.9mm
What is the bolt pattern on a 2009 Ford f250?
The lug pattern for a 2009 Ford F-250 is 8x170mm, which means there are 8 bolt holes and the distance between them is 170mm. This is consistent with the Super Duty line of F-250s from 1999 through 2024.
- Bolt Pattern: 8x170mm
- Number of Lugs: 8
- Bolt Circle: 170mm
What does the 6x127 bolt pattern fit?
Which vehicles use 6x127 wheels? Popular vehicles include: Chevrolet TrailBlazer (2002-2009), GMC Envoy (2002-2009), Buick Rainier (2004-2007), Isuzu Ascender (2003-2008), Oldsmobile Bravada (2002-2004), Saab 9-7X (2005-2009), and others depending on trim level and production year.
What year did Ford switch to 8x170?
Ford switched to the 8x170 bolt pattern for its Super Duty trucks, starting with the 1999 model year. This new pattern replaced the previous 8x6.5 (or 8x165.1mm) bolt pattern used on models up to 1998.
- 1999: Ford began using the 8x170mm bolt pattern on its F-250 and F-350 Super Duty trucks.
- Pre-1999: Ford used the 8x6.5 bolt pattern.
- 1999-2005: The 8x170mm pattern was used on models like the F-250, F-350, and Excursion.
- 1999-2007: The 8x170mm pattern was also used on the first generation of the Super Duty F-250.
