What is the bolt pattern on a 2018 Dodge Avenger?
The short answer: There is no 2018 Dodge Avenger; that model year does not exist. The Dodge Avenger line ended after the 2014 model year.
In more detail: For wheel and tire compatibility, the Dodge Avenger produced from 2007 through 2014 uses a bolt pattern of 5x114.3 mm (five lug holes on a 114.3 mm circle). Since there was no 2018 Avenger, this bolt pattern applies to the entire Avenger run in that era. If you’re shopping wheels, verify the exact year and trim of your car to ensure proper fitment, and consult the VIN or factory specs for confirmation.
Bolt pattern specifics for the Avenger (2007–2014)
Below are the key facts you should know when checking wheels or replacing rims for the Avenger family. The information here pertains to the last generation of the model (2007–2014).
- Bolt pattern: 5x114.3 mm (five-lug on a 114.3 mm circle).
- Applicable years: 2007–2014 Dodge Avenger.
- Practical note: When replacing wheels, confirm the hub bore and offset for your exact vehicle configuration; aftermarket wheels made for 5x114.3 mm will generally fit if the offset and hub bore match.
In short, the Avenger’s standard bolt pattern is 5x114.3 mm for its eligible years. There is no 2018 Avenger to match against, so use this pattern as the baseline for any wheel replacements or upgrades.
Practical verification steps
How to confirm the bolt pattern on your car
Check the vehicle’s owner’s manual, the driver’s door placard, or the stock wheel specification in Chrysler’s parts catalogs. If in doubt, measure the bolt circle or consult a reputable tire and wheel shop to verify compatibility before purchasing.
Summary
The 2018 Dodge Avenger does not exist. The Dodge Avenger was produced from 2007 to 2014 and uses a 5x114.3 mm bolt pattern. For any wheel upgrades or replacements, use 5x114.3 mm as the baseline, and always verify hub bore and offset for your specific vehicle configuration.
What Dodge has a 5x127 bolt pattern?
Dodge Journey Bolt Pattern - Generations:
| Generation | Production Years | Bolt pattern |
|---|---|---|
| JC49 [2008 .. 2020] | 2008-2020 | 5x127 |
| 2021 .. 2026 | 2021-2025 | 5x108 |
What bolt pattern is equal to 5X115?
5X4.53"
BOLT PATTERNS CONVERSIONS (METRIC TO SAE)
| METRIC | SAE |
|---|---|
| 5X115 | 5X4.53" |
| 5X118 | 5X4.65" |
| 5X120 | 5X4.72" |
| 5X120.6 | 5X4.75" |
What is the bolt pattern on a Dodge Avenger?
The Dodge Avenger has a 5x114.3mm (or 5x4.5") wheel bolt pattern, which applies to both the first generation (1994–2000) and the second generation (2007–2014). This means the wheel has 5 lug holes with a bolt circle diameter of 114.3 millimeters or 4.5 inches.
- Bolt pattern: 5x114.3mm or 5x4.5"
- Lugs: 5
What vehicles use a 6x114.3 lug pattern?
A 6x114.3 bolt pattern, also known as 6x4.5, fits various vehicles, most notably Nissan models like the Frontier, Pathfinder, and X-Terra. It is also found on some Mercedes-Benz (X-Class), Kia (Borrego), Pontiac, Renault, Suzuki, and Ford (Corvair, Mustang) vehicles.
Nissan
Frontier, Pathfinder, X-Terra, NP300 / Navara, and Terra.
Mercedes-Benz
X-Class.
Kia
Borrego and Mohave.
Other vehicles
- Ford: Corvair, Mustang
- Hyundai:
- Mitsubishi: Raider, Montero Sport
- Pontiac: Montana SV6
- Renault: Alaskan
- Saturn: Relay
- Suzuki: Equator
Important note
- Before purchasing wheels, always confirm the correct bolt pattern for your specific vehicle model and year, as some vehicles may use different patterns even within the same manufacturer.
