What is the bolt pattern on a 300 series?
The 300 Series, in common automotive reference, refers to Toyota’s Land Cruiser LC300. Its bolt pattern is 6 lug on a 139.7 mm circle, written as 6x139.7 mm (6x5.5 inches).
In plain terms, the LC300 uses six wheel studs arranged on a circle that measures 139.7 millimeters across. This pattern matters when you’re choosing wheels, adapters, or aftermarket setups. It differs from many passenger cars that use five lug holes, and it’s important to confirm both lug count and bolt circle when swapping wheels. The LC300 debuted in 2021 as the successor to the LC200 and shares its heavy-duty, off-road design language with other Toyota SUVs on similar platforms. Always verify the exact fitment for your market version, as some regional models can have small variations.
Bolt pattern basics
Below are the essential facts you need to know about the LC300’s lug pattern before shopping for wheels or adapters.
- Number of bolts: 6
- Bolt circle diameter: 139.7 mm (5.5 inches)
- Center bore considerations: ensure the wheel centers match the hub or use centering rings as needed
- Cross-compatibility: some 6x139.7 mm wheels fit multiple Toyota 6-lug models, but confirm caliper clearance and spec compatibility for your exact vehicle
Understanding these basics helps you avoid ill-fitting wheels and potential safety issues. When in doubt, consult your dealer or a trusted wheel shop to confirm fitment before purchase.
Model compatibility and aftermarket options
Many aftermarket wheels are offered in the 6x139.7 mm pattern, which is shared by several Toyota 6-lug models. However, even with a correct lug pattern, brake caliper clearance, hub bore size, and offsets must be considered to ensure proper fitment and safe operation.
Practical compatibility notes
- Shared pattern: LC300 often aligns with the LC200 and other Toyota 6x139.7 mm setups, enabling a broader aftermarket wheel selection in some regions.
- Brake clearance: some aftermarket wheels may contact larger brake calipers or anti-loft devices; verify caliper clearance with the chosen wheel model.
- Center bore rings: if the wheel’s center bore is larger than the hub, centering rings can preserve hub centricity and balance.
- Offset considerations: ensure the wheel offset maintains proper fender clearance and steering geometry for your LC300 configuration.
Bottom line: the LC300’s 6x139.7 mm bolt pattern is well-supported by many aftermarket options, but fitment isn’t guaranteed simply by lug pattern alone. Always verify hub bore, offset, brake clearance, and overall fit with your specific vehicle and market version.
Summary
The Toyota Land Cruiser LC300 (300 Series) uses a 6x139.7 mm bolt pattern, commonly described as 6-lug on a 139.7 mm circle. When upgrading wheels, confirm not only the lug pattern but also hub bore, offset, and brake clearance. With careful verification, you can access a wide range of aftermarket wheels designed for the LC300 family and related 6-lug Toyotas.
What's the bolt pattern for Chrysler 300?
The bolt pattern for all Chrysler 300 models from 2004 to the present is 5x115mm. This means there are five lug holes on a circle with a diameter of 115 millimeters.
- Bolt Pattern: 5x115mm
- Number of Lugs: 5
- Lug Circle Diameter: 115mm
- Hub Bore: 71.5mm
Note: Older models like the Chrysler 300M (1998-2004) have a different bolt pattern of 5x114.3mm.
What has a 4x108 bolt pattern?
Cars with a 4x108 bolt pattern include many models from Ford, Volvo, and Peugeot, such as the Ford Escort, Focus, and Fiesta, as well as older Alfa Romeos and Saabs. You can also find this bolt pattern on various vehicles from other manufacturers like Mazda, Mercury, Citroën, and Audi.
Ford
- Escort: Most models
- Focus: Many models
- Fiesta: Many models
- Mustang: Models from 1974-1993
- Tempo: Most models
- Contour: Most models
- Mercury Cougar: Some models
Volvo
- 850: Most models
- XC70: Some models
- Other: Many older and newer models
Peugeot
- 106, 206, 306, 405: Many models
- 308, 3008, 5008: Many models
- Partner, Partner Tepee: Many models
Other makes
- Alfa Romeo: Older models like the GT and Spider
- Audi: Older models like the 80 and 90
- Saab: 900, 9000, and other models
- Mazda: Various models
- Mercury: Various models
- Citroën: Various models
- Abarth: 600e
What is the bolt pattern on a Land Cruiser 300?
Bolt Pattern: The bolt pattern for the Landcruiser 300 Series is 6×139.7 mm, which is a common specification allowing for a wide range of aftermarket wheel options.
Which Lexus has a 5x120 bolt pattern?
What Lexus Spacer Has 5×120 Bolt Pattern?
| Models | Bolt Pattern | Center Bore |
|---|---|---|
| 2017-2025 Lexus LC | 5x120mm | 60.1mm |
| 2007-2025 Lexus LS | 5x120mm | 60.1mm |
| 2023-2025 Lexus TX | 5x120mm | 60.1mm |
| 2024-2025 Lexus LM | 5x120mm | 60.1mm |
