What is the bolt pattern on a 98 Integra Type R?
The bolt pattern on a 1998 Integra Type R is 4 on 100 millimeters (4x100). This four-lug configuration is standard for DC2 Integras and many Honda/Acura models from that era. The hub bore is 64.1 mm, which can require hub rings when mounting certain aftermarket wheels.
Bolt pattern specifics
Below are the core specs you need to know when replacing or upgrading wheels for the 1998 Integra Type R:
- Bolt pattern: 4x100 (four lug holes on a 100 mm bolt circle)
- Center bore: 64.1 mm (hub bore)
- Lug nut size and seat: typically M12x1.5 with a conical/taper seat; verify with your wheel manufacturer or OEM lug nuts
- Wheel compatibility note: Many 4x100 wheels will fit directly, but aftermarket wheels with a larger center bore may require hub-centric rings for proper alignment and safety
With these specifications in mind, you can accurately verify wheel compatibility, avoid fitment issues, and ensure safe installation for the 1998 Integra Type R.
Summary
The 1998 Integra Type R uses a 4x100 bolt pattern with a 64.1 mm center bore. When shopping for wheels, look for 4x100 compatibility, confirm the correct lug nut size (M12x1.5 with a conical seat), and consider hub rings if the new wheels have a larger bore than 64.1 mm. This ensures proper fitment, braking clearance, and safe road use.
