What is the bolt pattern on a Honda HR-V?
The Honda HR-V uses a 5-lug bolt pattern on a 114.3 mm circle (5x114.3) with a 64.1 mm center bore. In practical terms, most wheels advertised as 5x114.3 with a 64.1 mm bore will fit, but you should confirm offset and brake caliper clearance for your specific year and trim.
Bolt pattern specifications
Key measurements that define wheel compatibility for the HR-V:
- Bolt pattern: 5x114.3 mm (5 lug holes on a 114.3 mm circle)
- Center bore: 64.1 mm
- Typical wheel compatibility: OEM wheels and most aftermarket wheels labeled 5x114.3 with a 64.1 mm bore
These measurements determine hub alignment and whether a wheel can mount securely. If the wheel bore is larger than 64.1 mm, hub-centric rings are commonly recommended to improve centering and reduce vibration.
Compatibility by model year and notes
Across the HR-V lineup, the 5x114.3 bolt pattern has been the standard for recent generations in most markets. While the pattern itself is consistent, always verify the bore and clearance for your specific vehicle, as regional variations or trim-specific brake setups can affect fitment. When in doubt, consult Honda’s official specifications or a trusted wheel retailer with your VIN.
- Pattern: 5x114.3
- Center bore: 64.1 mm (use hub rings if bore is larger)
- Offset and width: must fall within the vehicle’s recommended range to avoid rubbing or improper handling
- Brake caliper clearance and spoke design: ensure the chosen wheel clears calipers and rotor geometry
Before you shop for wheels, verify these compatibility factors:
In short, matching the 5x114.3 pattern with a 64.1 mm bore is the starting point; offset and clearance considerations complete the fit for your HR-V’s year and trim.
How to verify fit when buying wheels
To minimize fitment problems, follow these checks before purchasing wheels or tires:
- Confirm the bolt pattern is 5x114.3 and the center bore is 64.1 mm for your vehicle year/trim
- Measure or confirm the wheel offset and width align with OEM specifications
- Ensure there is adequate clearance for brake calipers and the rotor hat
- Consider hub-centric rings if the wheel bore is larger than 64.1 mm
Proper due diligence helps ensure a safe upgrade, with reliable centering and correct fitment for your HR-V’s configuration.
Summary
The Honda HR-V standardly uses a 5x114.3 bolt pattern with a 64.1 mm center bore across recent models. When replacing wheels, verify pattern, bore, offset, width, and clearance for your specific year and trim, and consult a dealer or reputable wheel retailer if you’re unsure.
