What is the bolt pattern size for Toyota Highlander?
The bolt pattern for the Toyota Highlander is a 5-lug configuration on a 114.3 mm (4.5 inches) diameter circle, with a center bore of typically 60.1 mm. This sizing covers most modern Highlanders, but you should verify the exact specs for your specific year and trim when shopping for wheels.
Bolt pattern details
Details of Highlander’s bolt pattern include the standard five-lug configuration and the circle diameter, plus the center bore and lug nut characteristics. The following items summarize the standard specs you’re likely to encounter on most model years.
- Bolt pattern: 5 lug holes on a 114.3 mm (4.5 inches) diameter circle
- Center bore: 60.1 mm (2.37 inches)
- Lug nut size: typically M12 x 1.5 thread with a conical seat
- Compatibility note: Some aftermarket wheels may require hub-centric rings or spacers depending on the wheel’s hub bore and offset
Conclusion: For most Toyota Highlanders, the standard bolt pattern is 5x114.3 mm with a 60.1 mm center bore, and lug nuts are typically M12x1.5. Always verify these specs for your exact model year and wheel choice.
Generational consistency
Toyota has maintained the 5x114.3 bolt pattern for the Highlander across recent generations, including the current model lineup. However, hub bore and offset can vary by year and trim, so confirm for your exact vehicle using the VIN or wheel specifications.
Notes for shoppers and wheel enthusiasts
When shopping for wheels or performing a wheel upgrade, keep these considerations in mind:
Summary: In short, the Toyota Highlander uses a 5x114.3 mm bolt pattern with a 60.1 mm center bore. This applies to most modern models, but always verify for your specific year and trim to ensure proper fitment and safety.
Summary
The Highlander’s standard wheel fitment centers on a 5x114.3 mm bolt pattern with a 60.1 mm hub bore. Verify for your exact year, trim, and intended wheels to ensure a perfect, safe fit.
