What is the fuel mileage on a 2013 f250 6.2 L?
On average, you can expect the 2013 F-250 with a 6.2-liter V8 to deliver roughly mid-teens mpg in mixed driving. Two-wheel drive models typically achieve about 12 mpg in city driving and 18 mpg on the highway, while four-wheel drive models are a touch lower, around 11 mpg city and 17–18 mpg highway; real-world results vary with towing, payload, and terrain.
Engine and drivetrain context
The 6.2-liter V8 in the 2013 Ford F-250 is a gasoline-powered workhorse designed for towing and hauling. Paired with a 6-speed TorqShift automatic transmission, it prioritizes torque for heavy-duty tasks over high fuel efficiency, which is common among super-duty pickups built for payload rather than city commuting.
EPA ratings by drivetrain
The official EPA estimates vary by drivetrain and cab/bed configuration. The following figures are representative estimates for typical 6.2L F-250 configurations from that year:
- 2WD (two-wheel drive): roughly 12 mpg city / 18 mpg highway; combined around 15 mpg.
- 4WD (four-wheel drive): roughly 11 mpg city / 17–18 mpg highway; combined around 13–14 mpg.
These are estimates; actual numbers depend on wheel/tire size, axle ratio, cab/bed configuration, and options. Real-world numbers tend to be lower in towing or heavy-load scenarios.
Real-world factors that affect mileage
Beyond EPA labels, several practical factors influence fuel economy in the field:
- Payload and towing: Carrying or towing loads dramatically reduces mpg, sometimes by single-digit or more on average trips.
- Terrain and driving style: Hills, wind, and aggressive acceleration/hard braking lower efficiency.
- Equipment and tires: Larger or aggressive terrain tires, and roof racks or hitch accessories, increase drag and reduce mileage.
- Maintenance and fuel quality: Proper maintenance, correct octane, clean air filters, and fresh spark plugs help maintain efficiency.
Understanding these factors helps set realistic expectations for fuel economy in real-world use.
Maximizing fuel efficiency on a 2013 F-250 6.2L
With the goal of improving mileage, consider the following best practices tailored to heavy-duty gasoline trucks:
- Keep tires inflated to the recommended pressure and avoid excessive tire wear.
- Use the vehicle’s cruise control on highways to maintain steady speeds.
- Lighten loads when possible and consolidate payload to minimize weight.
- Avoid frequent short trips; combine errands to reduce cold-start penalties.
- Perform routine maintenance, including air filters, spark plugs, and exhaust components; use recommended fuel grade.
Even with a 6.2L V8, careful driving and sound maintenance can yield noticeable improvements in real-world fuel economy.
Summary
The 2013 F-250 with a 6.2L V8 typically delivers mid-teens mpg in mixed driving, with 2WD configurations targeting roughly 12 mpg city and 18 mpg highway, and 4WD variants slightly lower in city driving. Real-world results vary widely based on towing, payload, terrain, and maintenance, but informed driving and proper upkeep can help you get more miles per gallon from this heavy-duty pickup.
