What is the gear ratio of the 2019 Ford F450?
The 2019 Ford F450 has a gear ratio of 4.88:1. This means that for every single rotation of the driveshaft, the rear wheels will rotate 4.88 times. The gear ratio is an important specification that affects the truck's towing capacity, acceleration, and fuel efficiency.
Understanding Gear Ratios
The gear ratio is a measure of the relationship between the rotational speed of the engine and the rotational speed of the wheels. It is expressed as a ratio, such as 4.88:1. This ratio determines how much torque is delivered to the wheels, which is crucial for towing heavy loads and accelerating the vehicle.
A higher gear ratio, like 4.88:1, means the wheels will rotate fewer times for each rotation of the engine. This provides more torque to the wheels, making the vehicle better suited for towing and hauling heavy loads. However, it also results in lower top speeds and reduced fuel efficiency during highway driving.
Conversely, a lower gear ratio, like 3.73:1, will provide less torque but allow the vehicle to reach higher top speeds and achieve better fuel economy on the highway. The gear ratio is an important consideration when choosing the right truck for a specific application, whether it's towing a trailer, hauling heavy cargo, or primarily driving on the highway.
The 2019 Ford F450 Gear Ratio
The 2019 Ford F450 is equipped with a 4.88:1 gear ratio as standard. This high gear ratio is well-suited for the F450's intended use as a heavy-duty work truck, providing ample torque to handle large towing and hauling tasks.
The 4.88:1 gear ratio, combined with the F450's powerful 6.7-liter Power Stroke diesel engine, allows the truck to tow up to 35,000 pounds when properly equipped. This makes the F450 one of the most capable trucks in its class for towing and hauling heavy loads.
However, the high gear ratio does come with a trade-off in terms of fuel efficiency. The F450 is not known for its stellar fuel economy, especially when compared to lighter-duty trucks or vehicles designed primarily for highway driving.
Overall, the 4.88:1 gear ratio of the 2019 Ford F450 is a key specification that enables the truck's impressive towing and hauling capabilities, making it a popular choice for those with demanding work requirements.
What rear axle is in a F-450?
The Dana S-110 replaced the lower capacity, 11.25" ring gear Dana 80 previously used for the F-450. Starting with the 2005 model year, the Dana S-110 is used in all F-450 cab and chassis trucks.
What gear ratio is 2017 f350 dually?
Axle gearing is either 3.31:1 or 3.55:1 for the turbo-diesel, while the 6.2-liter gas engine typically will run 3.73:1 gears.
How do I find out what gear ratio my Ford has?
To determine the axle ratio of your vehicle, locate the two-digit axle code first, then use your vehicle's towing guide to find the axle ratio that corresponds to that code. If your vehicle has a limited-slip differential, it will be noted as Limited Slip.
How can you tell if you have 3.73 gears?
if the driveshaft turned 3 3/4 revolutions for two rotations of the tire, you have a 3.73 gear.
What is the gear ratio of the Ford f450?
Ford F-450 Compression and Gear Ratios
First: 4.615 to 1. Second: 2.919 to 1. Third: 2.132 to 1.
What is the difference between 3.73 and 4.10 axle ratio?
a 4.10 has a huge impact on engine rpm because you are selecting second gear with a 3.73 to pull the grade, but you can hit third gear with a 4.10. Your engine speed is about 1,000 rpm lower, so temperatures under hood are going to be significantly lower. Higher numerical ratios often increase fuel consumption.
What is the difference between F-450 front axle and F-350?
The F-350 can handle 5,600 pounds on the front axle and 10,300 pounds on the rear. For the F-450, things get interesting. It can handle 6,000 pounds on the front axle and 9,900 pounds on the rear for a more balanced axle rating.
What is the rear axle ratio of the 2017 F-450?
Aside from a standard 4.30:1 axle ratio (4.10 gears are the optional upgrade on the F-350), the F-450 gets larger-diameter disc brakes at all four corners, 10-bolt wheels (versus 8-bolt units), and a wider front track.
What trucks have a Dana 60 in the rear?
Rear axle
- 1966–1970 Coronet & R/T.
- 1966–1972 Charger & R/T.
- 1968–1972 Super Bee.
- 1970–1971 Challenger.
- 1963–1993 Dodge Ram 250 and 350.
- 1994–2002 Dodge Ram 2500 (V8 only)
- 2004–2006 Dodge Ram SRT-10.
How to find gear ratio by VIN?
You don't. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number. That is the ONLY information contained by the VIN.
