Loading

What is the ground clearance of the 2024 Tundra TRD off-road?

The 2024 Toyota Tundra TRD Off‑Road sits roughly 9.6 inches (about 244 mm) off the ground in its stock configuration, with small variations depending on tire size and suspension setup. This figure can shift slightly based on specific build and testing conditions.


Ground clearance is a key parameter for off‑roading and rough‑terrain driving. As Toyota’s TRD Off‑Road model emphasizes rugged capability, understanding the exact height helps in planning obstacle clearance, approach angles, and overall trail readiness. While the baseline is published, real‑world clearance can differ with tires, loads, and aftermarket modifications.


Official specifications and what can change


Here is a quick overview of the ground clearance figures and related factors for the 2024 Tundra TRD Off‑Road.



  • Official base ground clearance: about 9.6 inches (244 mm) with the standard equipment for the TRD Off‑Road.

  • Tire and wheel influence: tire size and wheel packages can shift the overall height; larger off‑road tires can alter clearance within the vehicle’s design tolerances.

  • Suspension configuration: the TRD Off‑Road uses a tuned suspension with off‑road focus; height is maintained within a narrow range, though heavy loads can temporarily reduce clearance.

  • Measurement context: clearance is typically specified with the vehicle unladen and at standard ride height, excluding accessories that add height; real‑world clearance may vary under load or with roof racks and equipment.

  • Trim comparisons: different trims (for example, the TRD Pro) may offer different height figures due to tires and suspension tuning, so verify the exact spec for the specific build you’re considering.


These points help explain why you might encounter slightly different numbers in brochures, dealer sheets, or owner manuals. For the most accurate, build‑specific figure, consult Toyota’s official specification sheet or a dealership.


Practical implications


With around 9.6 inches of ground clearance, the Tundra TRD Off‑Road provides solid capability for a wide range of off‑road trails, offering good obstacle clearance without extreme lift. Riders planning aggressive rock crawling or exceptionally rough terrain may look at aftermarket lift options or tire choices, but for many trails the stock height delivers a balanced mix of on‑road stability and off‑road ability.


Summary


In its stock form, the 2024 Tundra TRD Off‑Road is rated at approximately 9.6 inches of ground clearance, with minor real‑world variations based on tires, suspension, and load. For precision on a specific build, refer to Toyota’s official specs or your local dealer.

What does a trd off-road add to Tundra?


TRD Off-Road's Bilstein® shocks: These enhance off-road performance by improving control over suspension travel, reduce body roll for better stability during cornering, provide a smoother ride with superior impact absorption, and offer precise handling through responsive damping for improved steering feel and control.



Which Toyota Tundra to stay away from?


You should generally avoid the 2007, 2012, 2013, 2014, 2022, and 2023 model years of the Toyota Tundra due to issues like rust, engine problems, and poor reliability ratings. Specific issues vary by year, with early second-generation models (2007-2013) often cited for rust and engine/air pump failures, while the 2014 model year has complaints about premature brake wear and transmission problems. The third-generation 2022 and 2023 models have also received lower reliability scores and recalls due to potential engine issues.
 
Model years to avoid

  • 2007: A high number of complaints regarding engine problems, including air injection pump failure and knocking pistons. 
  • 2012: Considered one of the worst years, with high repair costs and issues with the engine and air induction pump. 
  • 2013: Reports of gearbox issues, lower fuel efficiency, and frame rust problems. 
  • 2014: Complaints include premature brake wear, drivetrain vibrations, and infotainment system glitches. 
  • 2022 and 2023: These third-generation models have lower reliability ratings from sources like Consumer Reports, with recall notices issued for potential engine failure. 

General considerations
  • High mileage: Avoid any Tundra with over 200,000 miles, as components may be nearing the end of their lifespan. 
  • Rust: Be particularly cautious of early second-generation models (2007-2013) due to a documented issue with frame rust. 



What is the ground clearance of the 2025 Tundra TRD off-road?


Ground Clearance (mm/in.) i-FORCE Powertrain SR: 264mm (10.4 in.) Long bed: 262mm(10.3 in.) SR, SR5, TRD Off-Road, TRD Sport: 279 mm/11.0 in.



What is the ground clearance of the 2024 Toyota Tundra?


8.5–9.4 inches
The ground clearance of the 2024 Tundra is 8.5–9.4 inches, depending on the model. And finally, the towing capacity is a maximum of 12,000 pounds, depending on the model for the 2024 model year.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.