What is the lug nut spec on a Honda Odyssey?
Answer at a glance: Most Honda Odyssey models use M12 x 1.5 lug studs with 19 mm lug nuts, a 60-degree conical seat, and a 5 x 114.3 mm bolt pattern; typical torque is around 80–85 ft-lbs. Always confirm with your vehicle’s manual or dealer data for your exact year and trim.
Core lug nut specifications
The following specifications cover the standard hardware used on most US-market Odyssey models across recent generations. They serve as the baseline for wheel service and parts compatibility.
- Thread size: M12 x 1.5
- Nut seat type: 60-degree conical (tapered) seat
- Hex size: 19 mm (3/4 inch)
- Bolt pattern: 5 × 114.3 mm
- Number of lug nuts per wheel: 5
Note: Some regional variations or aftermarket wheels may use different seat types or patterns. When in doubt, verify with the wheel manufacturer or a Honda dealership using your VIN.
Torque and installation guidance
Proper torque is essential for safe wheel seating and to avoid rotor or lug nut damage. The typical OEM torque specification for Honda Odyssey lug nuts is around 80–85 ft-lbs (approximately 108–115 Nm). When replacing wheels or lug nuts, use a calibrated torque wrench and re-check torque after a short drive, as recommended by service guidelines. For aftermarket wheels or lug nuts, always verify the required torque with the wheel manufacturer and consult the owner's manual.
Model-year nuances and verification tips
Across generations, the basic lug pattern and thread size for the Odyssey have remained consistent in many markets, but there can be exceptions due to regional specifications, trim packages, or aftermarket wheels. To confirm your exact specs, use these steps:
- Check the driver's door jamb placard for wheel data (bolt pattern and torque specification).
- Refer to the owner’s manual or Honda service website for year- and region-specific data.
- Inspect or measure the lug nut hex size and thread pitch if you are sourcing replacements.
- When in doubt, contact your local Honda dealer with your VIN for precise data.
These steps help ensure you select the correct lug nuts and achieve proper seating and torque for your specific Odyssey.
Summary
For most Honda Odyssey models, plan on M12 x 1.5 lug studs, 19 mm hex lug nuts, a 60-degree conical seat, and a 5 × 114.3 mm bolt pattern, torqued to roughly 80–85 ft-lbs. Always verify against your exact year, trim, and VIN data before purchasing parts or performing wheel work. This approach minimizes the risk of improper fitment or installation issues.
