What is the power output of the Honda S2000?
The Honda S2000 produces about 237–240 horsepower, depending on model year and market. The AP1 version delivered roughly 240 hp, while the AP2 version is rated around 237 hp, with small variations by region and test method.
AP1: 2.0-liter F20C (1999–2003)
Overview of the original high-revving powerplant that defined the S2000’s character and set the tone for its performance focus.
Power and performance highlights
- Engine: 2.0 L inline-4 DOHC i-VTEC (F20C)
- Peak power: 237 hp (177 kW) at ~7,800 rpm
- Torque: 153 lb-ft (208 Nm) at ~7,000 rpm
- Redline: 9,000 rpm
Note: Horsepower figures can vary slightly by market and the testing standard (SAE net vs. gross; JDM PS), but US-spec manuals commonly cite ~237 hp with the peak at high RPM.
AP2: 2.2-liter F22C1 (2004–2009)
The AP2 retained the high-revving spirit while increasing displacement to deliver more mid-range torque, with official power still around the mid-230s horsepower.
Power and performance highlights
- Engine: 2.2 L inline-4 DOHC i-VTEC (F22C1)
- Peak power: 237 hp (177 kW) at ~7,800 rpm
- Torque: 162 lb-ft (220 Nm) at ~6,500 rpm
- Redline: ~8,400–8,800 rpm depending on market
Conclusion: The AP2 preserved the S2000’s top-end power while offering stronger mid-range torque, contributing to noticeably improved everyday drivability without a large change in peak output.
Market variations and testing notes
Horsepower ratings have varied slightly by region and by the method used to measure power. In the US, the S2000 is typically cited at about 237 hp for the AP2 and 237 hp (SAE net) for the AP1, with Japan and Europe sometimes listing numbers in PS or gross terms that appear higher. The important takeaway is that the peak output sits in the mid-230s horsepower across generations, with AP2 offering more torque at lower RPMs without a major change in peak horsepower.
Summary
The Honda S2000’s power output centers on two generations: AP1 delivering around 240 hp and AP2 around 237 hp. While peak horsepower remains in the high-230s, the AP2’s increased displacement brings more usable torque for stronger low- to mid-range performance. Across markets, small variations exist due to testing standards and tuning, but the overall figure remains in the mid-230s horsepower range.
How fast is a Honda S2000 0 to 60?
6.8 seconds
But even with nearly 8000 revs on the tach, our very green (345 miles) test car was unable to break a wheel loose on our grippy test surface, which partly explains our rather lackluster performance: 0 to 60 took us fully 6.8 seconds, and the quarter-mile fell in 15.1 seconds at a more impressive 96 mph.
How does the S2000 make so much power?
Its not so much as compression as the VTEC changing the cam profile to make this engine produce optimal torque close to redline. This is what gives it the horsepower.
Why is the S2000 so special?
The S2000 achieved the highest specific power per unit volume of any mass-produced naturally-aspirated automobile piston engine due to its high-revving capability.
How much horsepower does a S2000 have?
237 hp
The Honda S2000 is a front mid-engine, rear wheel drive car, launched with a 2.0L inline four cylinder DOHC-VTEC engine (codename F20C) producing 237 hp. The S2000 was produced between 1999 to 2009, in two iterations for the US market. The first, named the AP1, was produced from 1999 to 2003.
