What is the recall on the Dodge fuel pump?
Quick answer: There isn’t a single recall that covers every Dodge vehicle. Over the years, multiple recall campaigns have affected different models and years, and eligibility depends on your vehicle’s VIN. If your Dodge is affected, the remedy typically involves replacing or repairing the fuel pump module or related components at no cost to the owner.
What follows explains how these recalls work, how to verify whether your specific vehicle is affected, common symptoms to watch for, and how to proceed with service if you’re impacted. The information reflects the current recall landscape and may change; always verify with official sources.
How recall campaigns for Dodge fuel pumps work
Recalls are initiated by government safety agencies (like the U.S. National Highway Traffic Safety Administration) in collaboration with the manufacturer. Each recall notice targets specific VIN ranges or production years and prescribes a corrective action that dealers must perform at no charge. Because recalls hinge on exact parts and production data, not every Dodge qualifies for every campaign, and eligibility is determined by the VIN.
Steps to check if your Dodge is affected
To determine whether your specific car is covered by a recall, follow these steps:
- Locate your Vehicle Identification Number (VIN). It’s printed on the dashboard near the windshield or on the driver’s door jamb and is also listed on your registration and insurance documents.
- Go to the National Highway Traffic Safety Administration (NHTSA) recall lookup at SaferCar.gov and enter your VIN to see active or past recall campaigns for your vehicle.
- Visit the official Mopar recall page or contact your nearest Dodge/Chrysler dealer to confirm coverage and schedule service if a recall is shown for your VIN.
- If a recall is confirmed, arrange the service appointment. Recalls are typically repaired at no cost to the owner, with parts and labor covered under the recall.
Note: Even if a current VIN search shows no recall, you should sign up for recall alerts through NHTSA to receive updates if new campaigns affect your vehicle in the future.
What to expect from dealer repairs under a fuel pump recall
When a recall is active for your Dodge, the dealer will perform the remedy specified in the notice. Common actions include:
- Replacing the fuel pump module or related components in the fuel system.
- Inspecting and, if needed, replacing wiring or connectors that may be corroded or damaged.
- Testing fuel pressure and verifying there are no leaks after the repair.
- Providing documentation and returning the vehicle to you with the recall completed at no cost.
Time and complexity can vary by campaign and vehicle, but dealers are obligated to complete the recall repair without charging you for parts or labor.
Symptoms that could signal fuel pump trouble
Regardless of recalls, be alert for signs that your fuel delivery system may be failing. If you notice any of the following, have your vehicle inspected promptly:
- Engine stalls or sputters, especially at highway speeds or under load.
- Hard starting or no-start conditions that gradually improve or worsen.
- Reduced power or hesitation during acceleration.
- Unusual noises from the fuel tank area, such as whining or buzzing.
- Unpleasant fuel odor or visible fuel leaks near the tank.
If you smell fuel or suspect a leak, stop safely and avoid driving the vehicle until inspected by a technician.
Summary
In short, Dodge fuel pump recalls are model-year and VIN-specific campaigns. To know if your vehicle is affected, check the VIN against official recall listings from NHTSA and Mopar, and contact a Dodge dealer for the mandated remedy. Because new campaigns can be issued, staying informed through official sources is essential to ensure you receive any eligible recall service at no cost.
