What is the spark plug gap on a 2010 Honda Accord V6?
The spark plug gap for the 2010 Honda Accord with the 3.5-liter V6 is typically 0.043–0.047 inches (1.1–1.2 mm).
In the 2010 Accord, the 3.5L V6 uses iridium or platinum plugs that are designed to operate within this standard gap range. Proper gap ensures reliable ignition, optimal fuel efficiency, and smooth running across a wide range of temperatures. When replacing plugs, it’s important to verify the gap on each plug and keep within the OEM spec, as aftermarket plugs can vary slightly.
What to know about the gap for the 3.5L V6
The 3.5-liter V6 in the 2010 Accord relies on a precise spark gap to ignite the air-fuel mixture efficiently. Deviating from the recommended gap can lead to misfires, reduced performance, or lower fuel economy. Always align the gap to the listed range for the plugs you install, even if they are marketed as “pre-gapped.”
If you’re replacing the spark plugs yourself, here is a quick checklist to ensure the gap is correct and the plugs seat properly.
- Verify the gap on each new plug to the 0.043–0.047 inch (1.1–1.2 mm) specification using a precise feeler gauge.
- Adjust the gap carefully with a proper spark plug gapping tool; avoid bending the center electrode or applying excessive force.
- Do not rely on pre-set packaging; some aftermarket plugs may ship with gaps outside spec.
- Tighten and torque the plugs to the Honda service specification after seating to ensure a proper seal and heat transfer (consult the manual for the exact torque value).
After completing the replacement, re-check the gap on the first few plugs you installed to confirm they remain within spec, especially if you used aftermarket parts.
Notes on plug types and OEM specs
Most replacements for the 2010 Accord V6 use iridium or platinum plugs designed to operate within the same gap range as OEM parts. Always verify the exact gap for the specific plug model you install and adjust accordingly. Some plug designs may have slightly different recommendations, but staying within the 0.043–0.047 inch (1.1–1.2 mm) range is generally appropriate for this engine.
Common plug options for the 2010 Accord V6
OEM-equivalent or reputable aftermarket plugs will typically be offered in the same gap range. When choosing a plug, refer to the vehicle’s service manual or Honda-approved part numbers to ensure compatibility and optimal performance.
Summary: For the 2010 Honda Accord V6, aim for a spark plug gap of 0.043–0.047 inches (1.1–1.2 mm). Always verify the gap on each plug before installation, use the correct torque, and consult the vehicle’s manual or OEM specifications for your chosen plug type.
What is the spark plug gap on a Honda 3.5 V6?
0.044"
What is the spark plug gap for a 3.8 L V6?
Set 6 U-Groove Design Spark Plugs Gap 0.060 For 3.0L 3.2L 3.8L 4.1L V6 L6.
What is the gap on the spark plug for a Honda Accord?
0.044
NGK Set of 4 Laser Iridium Spark Plugs Gap 0.044 For Accord Civic HR-V ILX L4.
What is the spark plug gap on a 2010 Honda Accord 3.5 V6?
Notes: Gap 0.044".
