What is the stock tyre size of a Toyota Yaris?
The stock tyre size for a Toyota Yaris is not universal; it varies by model year, market and trim. The exact size is listed on the door jamb placard and in the owner's manual. For many recent Yaris hatchbacks, common factory sizes are typically 185/60R15 or 195/50R16, with other sizes appearing on older generations or specific trims.
Understanding tyre size codes
To interpret the numbers stamped on a tyre, you need to know what each part means. The size code typically reads as width/profile diameter, such as 185/60R15, where 185 is the width in millimeters, 60 is the aspect ratio (the height as a percentage of width), and 15 is the wheel diameter in inches. The letter R denotes a radial construction, and additional digits indicate load index and speed rating.
Knowing how to read these codes helps you verify the factory specification and spot any inappropriate replacements. Car makers often publish several sizes for different wheel options or trim levels in the same model year.
- 185/60R15: a common size for base 15-inch wheel configurations.
- 195/50R16: a frequent option for mid-range trims with 16-inch wheels.
- 165/65R14 or 175/65R14: sizes you might encounter on older or budget trims with smaller wheels.
- 205/45R16: less common, but seen on some sport-oriented or rare regional variants with 16-inch wheels.
In practice, the exact factory size depends on the market and generation, so the door placard or the owner’s manual remains the definitive source.
Common stock sizes you might see on Yaris models
The following sizes are representative of factory configurations found on various Yaris generations, markets and wheel options. Always confirm with the vehicle’s placard or official documentation for your exact car.
- 185/60R15 — widely used on 15-inch wheel configurations in many markets
- 195/50R16 — commonly used on mid-range trims with 16-inch wheels
- 165/65R14 or 175/65R14 — seen on older/base trims with smaller wheels
Note: Some markets or special editions may offer alternative sizes. If you’re replacing tyres, selecting the exact OEM size is important for safety, performance and fuel economy. Consult your owner’s manual or a professional if you’re unsure.
How to verify the exact size for your Yaris
To determine the precise stock tyre size for your specific vehicle, follow these steps:
- Inspect the door jamb placard near the driver's door; it lists the recommended tyre sizes for front and rear wheels.
- Check the owner's manual under the Tires and Wheels specifications section.
- Examine the sidewall of your current tyres for the size stamped on them; match this with the placard values if you’re using the same model and trim.
- If you’re uncertain or have a regional variant, contact a Toyota dealer or certified tyre retailer for confirmation.
Conclusion: The placard and manual are your go-to sources for the exact factory tyre size. When in doubt, seek professional guidance to ensure compatibility with your Yaris’ suspension, speed rating, and load requirements.
Summary
There is no single “one-size-fits-all” tyre size for the Toyota Yaris. The correct stock size depends on the car’s year, market and trim. The most common factory sizes seen on recent Yaris models are 185/60R15 and 195/50R16, but older generations and special editions can use other dimensions such as 165/65R14 or 205/45R16. Always verify with the vehicle’s door placard or the owner’s manual, and consult a tyre professional if you’re replacing tyres.
