What is the tire pressure for a 2008 Toyota Camry?
The recommended cold tire pressure for a 2008 Toyota Camry is 32 psi for the front and rear tires. This figure is standard across most trims and is listed on the driver's door jamb placard and in the owner's manual.
Drive conditions and tire sizes can vary slightly, so it’s best to verify the exact numbers for your specific configuration on the placard or in the manual. Maintain proper inflation when tires are cold, and adjust only as needed for heavy loads or extreme temperatures.
Where to find the official specification
The precise tire pressure specification for your Camry is printed on the driver's door jamb placard. That placard shows the recommended cold inflation for the front and rear tires as well as the spare tire, if equipped. The owner's manual also provides the official guidance and notes about load adjustments and temperature effects.
Note that some Camry trims or tire size options may have minor variations. Always rely on the placard for your exact vehicle configuration and consult the manual if you’re unsure.
How to check and adjust tire pressure
Use this quick checklist to verify and adjust your Camry’s tires when they’re cold.
- Park on a flat surface and wait for the tires to cool for at least three hours, or drive less than a mile since they were last checked.
- Locate the recommended pressures on the driver’s door placard; note the front and rear values.
- Use a reliable tire pressure gauge to check each tire’s pressure when cold.
- If a tire is underinflated, add air in small increments (about 1–2 psi) and recheck until you reach the target.
- Ensure valve caps are securely tightened and recheck all tires after adjustment.
After adjusting, recheck all tires to confirm you’ve reached the correct pressures and that there are no leaks or damaged valves.
Spare tire and other considerations
If your Camry is equipped with a temporary spare, it typically requires about 60 psi, but you should confirm the exact value in the owner's manual or on the spare’s label. Temperature and load can affect tire pressure, so regular checks are recommended, especially before long trips or in extreme weather.
Special notes by trim or tire size
Some Camry models from this era may use different tire sizes (e.g., 16", 17" wheels). While 32 psi is common, always verify the door placard for your specific configuration, since exact numbers can vary slightly with tire width or load rating.
Weather and load considerations
Cold temperatures can cause a noticeable drop in tire pressure. If you work or live in a cold climate, you may need to check and adjust more frequently. Carrying heavy loads or passengers can also influence perceived handling and wear, so ensure pressures stay within the placard’s recommended range.
Summary
What is the normal tire pressure for a Toyota Camry?
The normal tire pressure for a Toyota Camry is typically 35 PSI for both the front and rear tires, but the exact recommendation is found on the sticker inside the driver's side door jamb. This pressure should be checked when the tires are cold.
- Find the specific pressure: Look for a sticker on the driver's side door frame or in the owner's manual for the precise recommendation for your specific model and tire size.
- Check when cold: Always check and adjust the tire pressure when the tires are cold (meaning the car hasn't been driven for at least three hours or has been driven less than a mile).
- Don't forget the spare: If your Camry has a spare tire, it usually requires a much higher pressure, often around 60 PSI.
Should I use 32 or 35 tire pressure?
For most cars, the recommended tire pressure is between 32 and 35 psi, and you should use the pressure listed on the driver's side door jamb or in the owner's manual. The correct pressure can vary by vehicle, and the pressure on the tire's sidewall is a maximum, not the recommended value. Using the correct pressure ensures proper handling, fuel efficiency, and tire life, while using the wrong pressure can cause poor handling, reduced traction, and premature wear.
How to find the right pressure
- Check the sticker on the driver's side door jamb. This is the most reliable source for your specific vehicle.
- Consult your owner's manual for the manufacturer's recommendation.
- Note that the pressure should be checked when the tires are cold (before driving).
- Don't use the pressure listed on the tire's sidewall, as this is the maximum pressure the tire can hold, not the recommended pressure for your car.
Why the correct pressure is important
- Too low: Can lead to poor fuel economy, premature tire wear, and a higher risk of tire failure.
- Too high: Can cause reduced traction, an uncomfortable ride, and rapid, uneven tire wear.
- Correct pressure: Optimizes handling, safety, and fuel efficiency, and helps your tires last longer.
Is 40 psi good tire pressure for a Toyota?
Tire pressure is usually 35 to 40 PSI for medium-size vehicles like SUVs and crossovers. This helps ensure stability and control and supports these vehicles' extra weight and size. A vehicle such as a ute, van, truck, or 4×4 needs higher tire pressure due to its heavier load and towing capacity.
What should the tire pressure be on a 2008 Toyota Camry?
between 30 and 35 PSI
Recommended Toyota Tire Pressures
As a general rule, tire pressure should be between 30 and 35 PSI. For example, the proper tire pressure for a Toyota Camry is typically 35 PSI for both the front and rear tires, while the recommended pressure for a Tundra pickup truck is 30 for the front and rear tires.
