What is the Toyota Sequoia bolt pattern?
The Toyota Sequoia uses a 6-lug bolt pattern on a 139.7 mm circle, commonly written as 6x139.7 mm (5.5 inches).
Bolt pattern basics
Understanding the pattern helps determine which wheels will physically mount onto the vehicle. The Sequoia shares its pattern with other Toyota trucks and SUVs that use the same platform.
- Bolt pattern: 6x139.7 mm (six lugs on a 139.7 mm circle)
- Imperial equivalent: commonly referred to as 6x5.5 inches
- Platform family: this pattern is used on several Toyota trucks and SUVs that share the same underpinnings (including the Sequoia and Tundra)
In short, the 6x139.7 mm pattern defines the basic footprint for the wheel mounting points; other fitment details still matter for a proper installation.
Year coverage and cross-compatibility
Historically, Toyota has used the 6x139.7 mm bolt pattern across the Sequoia from its first generation through the current model line. This broad compatibility means a large portion of aftermarket wheels designed for 6x139.7 mm will fit, provided other fitment details align.
- Generations covered: 2000s to present Sequoia models
- Cross-compatibility: compatible with wheels from other Toyota trucks and SUVs that use 6x139.7 mm
- Important caveat: verify center bore size, offset, and brake clearance with the wheel manufacturer and installer
In practice, this broad compatibility simplifies wheel shopping, but the exact fit depends on year, trim, and braking hardware.
Wheel and hub considerations
Beyond the bolt pattern, pay attention to hub bore size, wheel offset, and brake caliper clearance. If the aftermarket wheel's center bore is larger than the Sequoia’s hub, hub-centric rings may be used to ensure proper seating and reduce vibration. Likewise, incorrect offset can affect steering feel and wheel clearance.
- Center bore: ensure match or use hub-centric rings if needed
- Offset and backspacing: confirm suitable clearance for brakes and suspension
- Lug nuts: use the correct lug nut type and seat for the wheel
Consult a qualified tire and wheel professional to confirm a safe, compliant fit for your exact model year.
Summary
The Toyota Sequoia uses a 6x139.7 mm bolt pattern, or 6x5.5 inches, a standard shared across Toyota trucks built on the same platform. This makes many aftermarket wheels available, but always verify center bore, offset, and brake clearance for your specific year and trim before purchase.
What is the bolt pattern on a 2015 Toyota Sequoia?
The 2015 Toyota Sequoia has a 5x150mm bolt pattern. This pattern means there are 5 lug holes, and they are separated by a diameter of 150 millimeters.
- Bolt pattern: 5x150mm
- Lug holes: 5
- Diameter: 150mm
What is the bolt pattern on a 2013 Toyota Sequoia?
The 2013 Toyota Sequoia has a 5x150 bolt pattern. This means the wheels have five lug holes with a diameter of 150mm between them.
- Bolt Pattern: 5×1505 cross 1505×150
- Lugs: 5
- Measurement: 150mm between the lug holes
What is the bolt pattern on a Toyota Sequoia?
The Toyota Sequoia's lug pattern depends on the generation: 6x139.7 for models from 2001-2007 and 2022-present, and 5x150 for models from 2008-2021. When purchasing new wheels, it's essential to match the correct bolt pattern for your vehicle's model year to ensure a proper fit.
Lug pattern by generation
- 2001-2007: 6x139.7
- 2008-2021: 5x150
- 2022-Present: 6x139.7
What Toyota has a 5x150 bolt pattern?
These are standard on vehicles such as Sequoia, Land Cruiser, Tundra, LX, and GX.
