What is the transmission problem on a 2013 Dodge Dart?
If you're experiencing transmission issues with your 2013 Dodge Dart, you're not alone. This model year has been known to have some common transmission problems that can cause frustrating performance issues. In this article, we'll dive into the most common transmission problems with the 2013 Dart and provide guidance on how to diagnose and address them.
Common Transmission Problems in the 2013 Dodge Dart
The 2013 Dodge Dart was equipped with either a 6-speed manual or 6-speed automatic transmission. While both transmission types can experience issues, the automatic transmission has been more prone to problems, including:
- Delayed or Erratic Shifting: Some owners have reported that the transmission in their 2013 Dart takes too long to shift gears or shifts erratically, leading to a jerky driving experience.
- Transmission Slipping: In some cases, the transmission may slip or fail to engage properly, causing a loss of power and acceleration.
- Transmission Fluid Leaks: Leaks in the transmission system can lead to low fluid levels, which can exacerbate other transmission problems.
- Transmission Overheating: The transmission in the 2013 Dart can be prone to overheating, especially during heavy towing or high-speed driving, which can cause further damage.
These transmission issues can be frustrating and, if left unaddressed, can lead to more serious and costly problems down the road.
Diagnosing Transmission Problems in the 2013 Dodge Dart
If you're experiencing any of the above transmission issues with your 2013 Dodge Dart, the first step is to diagnose the problem. Here are some steps you can take:
- Check the Transmission Fluid Level: Low fluid levels can contribute to many transmission problems, so start by checking the fluid level and topping it up if necessary.
- Inspect for Leaks: Look for any signs of fluid leaks around the transmission, such as wet spots or drips.
- Monitor Transmission Temperature: If the transmission is overheating, you may notice a burning smell or the transmission may feel hot to the touch.
- Perform a Diagnostic Scan: Use an OBD-II scanner to check for any diagnostic trouble codes related to the transmission, which can help pinpoint the specific issue.
Once you've identified the problem, you can then take the appropriate steps to address it, whether that's a simple fluid top-up, a more complex repair, or even a transmission replacement in severe cases.
Addressing Transmission Problems in the 2013 Dodge Dart
If you've diagnosed a transmission problem in your 2013 Dodge Dart, here are some steps you can take to address it:
- Transmission Fluid Change: If the fluid is low or contaminated, a simple fluid change may be all that's needed to resolve the issue.
- Transmission Repair: For more serious problems, such as slipping or erratic shifting, you may need to have the transmission repaired by a qualified mechanic.
- Transmission Replacement: In some cases, the transmission may be beyond repair, and a full replacement may be necessary.
- Preventive Maintenance: Regular maintenance, such as fluid changes and inspections, can help prevent future transmission problems and extend the life of your Dart's transmission.
Remember, addressing transmission issues promptly is crucial to avoid further damage and costly repairs down the line. If you're unsure about the best course of action, it's always a good idea to consult with a qualified automotive technician.
What is the recall on the 2013 Dodge Dart?
Summary: Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Dodge Dart vehicles manufactured February 24, 2012, to June 16, 2015. The affected vehicles may experience failure of the transmission control module (TCM), causing the transmission to unexpectedly shift into neutral.
What are symptoms of a bad transmission linkage?
With bushings, thumping, bumping, squealing, and whirring sounds are most common. This indicates a problem with the shift linkage, and that problem could be a worn bushing. Finally, transmission fluid leaks can indicate a problem with the bushing.
What is high mileage for a Dodge Dart?
Thus, the high mileage for the Dodge Dart is anything over 150,000 miles. Once it reaches and passes this point, it is much more likely to encounter serious troubles that will cost a bit of money to maintain.
What is the shift linkage recall on the 2013 Dodge Dart?
A total of 298,439 Dart sedans are affected from the 2013–2016 model years. A bushing on the shifter cable can wear out and cause the cable to separate from the six-speed automatic transmission in any gear, the filing said.
How many miles should a 2013 Dodge Dart last?
How long do Dodge Darts last? According to getjerry.com, a Dodge Dart should last 200,000-250,000 miles with proper maintenance. With exceptional care, the car could even make it past the 250,000-mile point.
What is the problem with the Dodge Dart automatic transmission?
The shifter cable bushing may fail allowing the shift cable to detach from the transmission. If the shifter cable detaches from the transmission, the vehicle may not perform the shifts performed by the driver. Additionally, despite selecting PARK with the shifter, the vehicle may roll away.
What is the most common problem with the 2013 Dodge Dart?
Suspension System Issues
Problems with the suspension system top the list of 2013 Dodge Dart common problems. Some owners have reported that their front passenger side axle snapped without warning.
Does the 2013 Dodge Dart have transmission problems?
"The affected vehicles may experience failure of the transmission control module, causing the transmission to unexpectedly shift into neutral," said NHTSA in its recall summary. "If the transmission shifts into neutral, it can cause loss of motive power, increasing the risk of a vehicle crash."
How much is a 2013 Dodge Dart worth today?
The value of a used 2013 Dodge Dart ranges from $1,466 to $5,275, based on vehicle condition, mileage, and options. Get a free appraisal here.
What is the code U0101 on a 2013 Dodge Dart?
A U0101 code occurs because the TCM is having a difficult time communicating with the rest of the car. That means the most common reasons for a U0101 code are very simple things, such as a faulty battery with voltage issues, damaged terminals, disconnected connectors, and damage to the ground connection.
