What is the wheelbase of a 1951 Chevy truck?
In brief: The wheelbase depended on the truck's model and configuration. Common figures from the 1951 Chevrolet Advance-Design lineup are 115 inches for the 1/2-ton 3100, 125 inches for the 3/4-ton 3600, and about 131 inches for the 1-ton 3800.
Beyond the short answer, the question depends on the exact variant in the 1951 lineup. Chevrolet's Advance-Design trucks were offered across payload ratings with different wheelbases; the wheelbase distance is measured between the front and rear axles and influences ride and load handling. The figures below reflect typical production configurations for the main 1951 pickups: 3100 (1/2 ton), 3600 (3/4 ton), and 3800 (1 ton), noting that cab/bed options and factory configurations could cause small variations.
Model-specific wheelbase figures
Below are the typical wheelbase measurements for the main 1951 Chevrolet truck ranges.
- 3100 (1/2 ton): 115 inches (292 cm)
- 3600 (3/4 ton): 125 inches (318 cm)
- 3800 (1 ton): 131 inches (333 cm)
Note: Wheelbase figures can vary slightly with different cab/bed configurations, wheel/tire options, or aftermarket modifications. The values above reflect common production measurements for the 1951 model year.
Why wheelbase matters
The wheelbase influences ride quality, stability, turning radius, and how weight is distributed across the chassis. Longer wheelbases typically yield smoother highway cruising and greater payload stability, while shorter wheelbases improve maneuverability in tight spaces.
Summary
The 1951 Chevrolet pickup wheelbase varied by model: about 115 inches for the 3100 (1/2 ton), 125 inches for the 3600 (3/4 ton), and 131 inches for the 3800 (1 ton). For an exact figure on a specific truck, check the VIN build sheet or factory data plate for that vehicle's cab/bed configuration.
What was the difference between the 1950 and 1951 Chevy truck?
Other than relocating the gas tank, some minor trim changes, and a few mechanical improvements there were no significant changes made for 1949 and 1950. The most noticeable change for 1951 was the elimination of the cowl vent in front of the driver door and the addition of opening vent windows in both doors.
How much is a 1951 Chevy truck worth?
The value of a 1951 Chevy truck, like the popular 3100 model, ranges significantly depending on its condition, originality, and any modifications, with good-condition models typically valued around $20,000 to $24,000, while high-end, restored, or rare versions can sell for well over $100,000. Poorly maintained trucks may have the lowest values, but exceptional examples can command much higher prices, with some "restomods" reaching over $150,000.
Factors influencing value
- Condition: The overall condition is the biggest factor. A well-maintained or fully restored truck will be worth more than one in poor condition with extensive needs.
- Originality: Vehicles that retain a high degree of original parts and features are generally more valuable than those with many modifications.
- Modifications: "Restomods" that combine classic looks with modern upgrades can sell for very high prices. However, poor or amateur modifications can negatively impact value.
- Rarity and Features: Specific configurations, such as particular engine options, body styles, or historical significance, can influence a truck's value.
- Mileage and History: Low mileage and a clean history can add to the value, while high mileage or a history of accidents can decrease it.
Price range examples
- Good condition: Around $20,000 - $24,000 for a model like the 3100 in good condition with average specifications.
- Excellent/High-end: Prices can easily exceed $100,000 for perfectly restored examples.
- Restomods: Highly customized trucks can sell for over $150,000.
- Low end: Trucks in poor condition may sell for as low as $10,000 or less.
What is the wheelbase of a 1951 Chevy pickup?
Chevrolet Advance Design
| Chevrolet Advance-Design Series | |
|---|---|
| Dimensions | |
| Wheelbase | 116 in (2,946 mm) 125.25 in (3,181 mm) 137 in (3,480 mm) |
| Length | 3100: 196.6 in (4,990 mm) (1947–1952); 191.3 in (4,860 mm) (1953–1955) |
| Curb weight | 4,598–7,985 lb (2,086–3,622 kg) |
What Chevy trucks have a 127 wheelbase?
The C10 was a new type of truck for Chevrolet. It was originally available in a 6.5-foot bed with a 115-inch wheelbase and an 8-foot bed with a 127-inch wheelbase. The C10 had improved weight distribution compared to previous Chevy trucks thanks to the increased load capacity of the front axle.
