What is the wheelbase of a 1954 Chevy truck?
The wheelbase for a 1954 Chevrolet truck varies by model and body configuration. In the common lineup, the 3100 half-ton measures about 115 inches, the 3600 three-quarter ton about 125 inches, and the 3800 one-ton about 131 inches.
In 1954, Chevrolet’s Advance-Design trucks offered multiple configurations, and bed length or cab options could cause small variations in the measured wheelbase. The figures below reflect the typical factory specifications for the standard configurations of that year. Always verify against the data plate or original dealer literature for a specific truck.
Common wheelbase configurations for 1954 Chevrolet trucks
Below are the standard wheelbase figures associated with the main 1954 Chevy truck models. These numbers refer to typical factory configurations and may vary with bed length or cab options.
- 3100 (½-ton): 115 inches
- 3600 (¾-ton): 125 inches
- 3800 (1-ton): 131 inches
In short, the wheelbase in 1954 Chevrolet trucks generally fell within these ranges depending on the model, with the light-duty half-ton being the shortest and the heavy-duty one-ton having the longest wheelbase. For exact measurements on a specific vehicle, consult the data plate, build sheet, or original factory literature.
Notes on verification and context
How to verify the wheelbase on a specific vehicle
Measure from the center of the front axle to the center of the rear axle, or check the original owner’s manual, build sheet, or dealership brochures. VIN/tower tags and a data plate on the glove box or door jamb can also reference the wheelbase. If you’re restoring a truck, cross-reference with catalog values for the exact year and model, and be mindful of any special-purpose or cab-and-chassis variants that might have different dimensions.
Summary
The 1954 Chevy truck wheelbase depends on the model: about 115 inches for the 3100, about 125 inches for the 3600, and about 131 inches for the 3800. Variations can occur with bed length and cab options, so verifying against the vehicle’s documentation or data plate is the best practice.
What is the wheelbase of a 51 Chevy truck?
The 1951 Chevrolet truck wheelbase is 116 inches for the 1/2-ton light-delivery models like the 3100 series. Other models had different wheelbases, such as the 3/4-ton commercial trucks which used a 125.25-inch wheelbase, and one-ton models which were available with a 137-inch wheelbase.
You can watch this video to learn how to determine the wheelbase of a vehicle: 25sLinesToGoYouTube · Apr 12, 2024
- 1/2-Ton models: 116 inches (e.g., 3100 Series)
- 3/4-Ton models: 125.25 inches
- One-ton models: 137 inches
What is the wheelbase on a 1954 Chevy truck?
Chevrolet Advance Design
| Chevrolet Advance-Design Series | |
|---|---|
| Engine | 216 cu in (3.5 L) I6 (1947–1953) 235 cu in (3.9 L) I6 (1954–1955) 261 cu in (4.3 L) I6 (1954–1955) |
| Transmission | 3-/4-speed manual 4-speed Hydramatic automatic (1954–1955) |
| Dimensions | |
| Wheelbase | 116 in (2,946 mm) 125.25 in (3,181 mm) 137 in (3,480 mm) |
What Chevy trucks have a 127 wheelbase?
The C10 was a new type of truck for Chevrolet. It was originally available in a 6.5-foot bed with a 115-inch wheelbase and an 8-foot bed with a 127-inch wheelbase. The C10 had improved weight distribution compared to previous Chevy trucks thanks to the increased load capacity of the front axle.
How much is a 1954 Chevy truck worth?
Typically, you can expect to pay around $23,550 for a 1954 Chevrolet Series 3100 1/2 Ton in good condition with average spec.
