What is the width of a 1963 Falcon rear axle?
The width of a 1963 Ford Falcon rear axle is 58 inches. This classic American compact car featured a rear axle that was relatively narrow compared to larger vehicles of the era, providing a more nimble and responsive driving experience.
Understanding the 1963 Ford Falcon Rear Axle
The 1963 Ford Falcon was part of the second generation of this popular compact car, which was introduced in 1960. The Falcon was designed to be a more affordable and fuel-efficient alternative to larger American sedans, and its rear axle dimensions were an important part of this design.
The 1963 Falcon's rear axle had a width of 58 inches, which was narrower than the rear axles found in full-size Ford models of the same era. This narrower axle contributed to the Falcon's nimble handling and responsive steering, making it a popular choice for drivers who wanted a more maneuverable and efficient vehicle.
Factors Influencing Rear Axle Width
The width of a vehicle's rear axle is influenced by several factors, including:
- Vehicle Size and Weight: Larger and heavier vehicles generally require wider rear axles to provide stability and support the vehicle's weight.
- Drivetrain Configuration: Rear-wheel-drive vehicles typically have wider rear axles to accommodate the differential and drive shafts, while front-wheel-drive vehicles may have narrower rear axles.
- Performance and Handling: Vehicles designed for performance and handling, such as sports cars, often have narrower rear axles to improve agility and responsiveness.
In the case of the 1963 Ford Falcon, the relatively narrow 58-inch rear axle was a deliberate design choice to enhance the vehicle's compact and efficient character, while still providing adequate stability and support for the car's weight and drivetrain.
How wide is the rear axle on a 1965 Falcon?
The 1964 & 65 Falcon and Comets V8's had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.
What is the width of the axle on a 1963 Ford Falcon?
A stock 63 falcon V8 is 56 inches, the narrowest 8" ford made. Approximate rear end widths measured from backing plate to backing plate.
How wide is the rear axle on a 1960 Falcon?
The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.
How do you measure bike axle width?
Very very carefully. Taking my ruler. And i can see that this one is 15 millimeters. So there we go that's how we measure the hub width. And through axle diameter. Now because we work in the bike.
How wide is a Ford 9 inch axle?
These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.
How wide is a 1963 Ford Falcon?
Deluxe, 2.4L, Leaded Petrol, 3 SPEED MANUAL
| Dimension | Metric | Imperial |
|---|---|---|
| Ford Falcon Height | 1384 mm | 4 ft 6 in |
| Ford Falcon Width | 1778 mm | 5 ft 10 in |
| Ford Falcon Length | 4602 mm | 15 ft 1 in |
| Ford Falcon Wheelbase | 2781 mm | 9 ft 1 in |
What is a 1963 Ford Falcon worth?
The value of a 1963 Ford Falcon can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $9,891 for a 1963 Ford Falcon in good condition with average spec. The highest selling price of a 1963 Ford Falcon at auction over the last three years was $15,400.
What is the width of the rear end of a 1964 Ford Falcon?
Here it is again,64/65 Comet/Falcon 8" rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle!
What is the width of a bike rear axle?
Rear thru-axles usually measure 142mm long and have a 12mm diameter, but you used to be able to find a few bikes with 135mm thru-axles. Thru-axles often have a lever built into them, which gives you tool-free removal if you need to fix a puncture or swap a wheel.
How wide is a full width axle?
Full width refers to the width of axles out of a full size truck/van. You are correct they do vary quite a bit. Usually a full width is in the neighborhood of 67-69" WMS for front axles and 66-67" for the rear.
