What kind of engine does a Ford Expedition have?
The Ford Expedition is powered by a turbocharged EcoBoost engine in its latest generations—the 3.5-liter EcoBoost V6 with twin turbochargers. The exact horsepower and torque vary by year and trim, but this engine remains the standard powerplant. Earlier Expeditions relied on traditional V8 engines, notably the 5.4-liter Triton V8.
Current engine setup
The current (latest-generation) Expedition uses Ford's 3.5-liter EcoBoost V6 with twin turbos. It is mated to a 10-speed automatic transmission and is available with rear- or selectable four-wheel drive depending on the trim. Power output typically sits in a broad range to support towing and daily driving.
- 3.5-liter EcoBoost V6 twin-turbo engine (standard across most trims).
- 10-speed automatic transmission.
- Estimated power output: typically around 380–440 horsepower and 470–510 lb-ft of torque, depending on model year and trim.
These power numbers translate to strong highway passing power and capable towing performance for a full-size SUV, while balancing highway fuel economy for long trips.
Notes on output by year
Ford has updated the EcoBoost tune over the years. If you are comparing model years, check the exact specifications for horsepower and torque in the window sticker, since the Expedition’s output can vary between base, XLT, Limited, and King Ranch/Platinum trims as well as any year-specific updates.
Historical engines
Before the EcoBoost era, Expeditions were powered by traditional naturally aspirated V8 engines. The most common powertrain in earlier generations was the 5.4-liter Triton V8, which provided ample low-end torque for towing and heavy payloads but offered lower fuel economy compared with turbocharged solutions.
- 5.4-liter Triton V8 (natural aspiration) – used in earlier Expeditions, delivering ample torque but lower efficiency than modern EcoBoost engines.
In the modern era, Ford’s EcoBoost V6 has supplanted the older V8 as the standard engine for Expeditions, delivering a balance of power and efficiency with advanced turbocharging and fuel-management technology.
Performance and practical considerations
Engine choice influences towing capacity, payload, and daily drivability. The 3.5-liter EcoBoost V6 is designed to provide strong acceleration for a vehicle of its size and respectable towing capability, while the twin-turbo setup helps maintain surge without sacrificing efficiency on long highway drives. For customers prioritizing ultimate power for heavy towing, higher-output variants within the EcoBoost family and proper configuration can maximize output within the Expedition lineup.
Summary
Today’s Ford Expedition is powered primarily by a 3.5-liter EcoBoost V6 twin-turbo engine, paired with a 10-speed automatic transmission. This engine replaces the older 5.4-liter V8 that powered earlier Expeditions. With varying outputs by year and trim, the EcoBoost setup delivers strong performance and towing capability while aiming to offer better efficiency for a full-size SUV. If you are buying used, verify the exact horsepower and torque for the specific year and trim you’re considering.
What Ford Expedition to stay away from?
The Ford Expedition years to stay away from include: 2004. 2006. 2003.
Are Expeditions V6 or V8?
A 3.5-liter EcoBoost® V6 engine with 10-speed SelectShift® automatic transmission maximizes fuel efficiency while providing confident performance.
Do Ford Expeditions have a 3.5 L engine?
Regarding performance, the Ford Expedition and the Expedition MAX are powered by Ford's robust 3.5L EcoBoost® V6 engine. This powerhouse engine delivers an impressive 400 horsepower and 480 lb. -ft. of torque when equipped with the Heavy-Duty Trailer Tow Package.
What engines do Ford Expeditions have?
3.5L EcoBoost® V6 engine
Invigorate your daily drive with the 2024 Ford Expedition. Each Expedition model is equipped with a 3.5L EcoBoost® V6 engine that comes in three variations, depending on the trim level you select.
