What kind of oil does a 2007 Ford Expedition 5.4 take?
The 2007 Ford Expedition 5.4L V8 engine requires 5W-20 motor oil. This is the recommended oil type and viscosity for this vehicle according to the owner's manual and Ford's specifications.
Detailed Explanation
The 2007 Ford Expedition is equipped with a 5.4-liter Triton V8 engine. Ford recommends using 5W-20 motor oil for this engine. The 5W-20 oil weight provides the right balance of flow and protection for the engine, especially during cold weather starts.
Using the correct oil type and viscosity is important for the proper operation and longevity of the engine. 5W-20 oil meets Ford's engineering specifications and is designed to provide optimal lubrication, fuel efficiency, and wear protection for the Expedition's powertrain.
Oil Change Interval
Ford recommends changing the oil and filter in a 2007 Expedition every 7,500 miles or 6 months, whichever comes first. However, it's always a good idea to check the owner's manual for the most up-to-date maintenance schedule.
Tips for Choosing the Right Oil
- Always use a high-quality, name-brand 5W-20 motor oil that meets Ford's WSS-M2C945-A specification.
- Avoid using oil additives or supplements, as they may not be compatible with the Expedition's engine.
- When changing the oil, be sure to dispose of the old oil and filter properly.
- Consider using a synthetic or synthetic blend oil for improved performance and protection.
Following Ford's recommended oil type and maintenance schedule will help ensure the 2007 Expedition's engine runs smoothly and efficiently for many miles to come.
How much oil does a 2007 Ford Expedition need?
Oil Grade: SEO15
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 7 quarts (with filter). After refill check oil level. |
| Torque: | 10 ft/lbs (Oil Drain Plug) |
Do Fords require synthetic oil?
For example, you probably need full synthetic motor oil if you tow an RV or car with your Ford Super-Duty or frequently drive with your Ford Explorer on dirt roads. This type of motor oil is more expensive than conventional oil due to the additional processing.
What is the best oil for a Ford Expedition?
Ford recommends using Motorcraft®* motor oil for your Ford vehicle. Using the right oil helps keep your vehicle's engine clean, reduces overall wear, and maximizes performance.
What kind of oil does a Ford Expedition 5.4 take?
Capacities and Specifications - 5.4L V8
| Name | Specification |
|---|---|
| Recommended motor oil (U.S.): Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil XO-5W30-QSP | WSS-M2C946-A |
| Recommended Motor oil (Canada): Motorcraft® SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12 | WSS-M2C946-A |
How much power does a 5.4 Triton put out?
Regular check-ups and addressing minor problems early can keep the engine running smoothly. When it comes to performance, the 5.4L Triton doesn't disappoint. Depending on the vehicle and configuration, it delivers horsepower ranging from 235 hp to 550 hp.
How many quarts of oil does a 5.4L Triton V8 take?
When changing the oil and filter it holds 6 qts. This will put it about halfway of the crosshatch area of the dipstick after cranking it to fill the filter and allowing drainback time.
Can I use 5W30 instead of 5W20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
What oil does Ford recommend?
Motorcraft meets Ford's strict standards for quality as it works to keep your engine in top shape. In general, Ford recommends SAE 5W-20 or 5W-30 for most of its vehicles. Hybrid vehicles may require 0W-20, which works better at lower temperatures.
How much oil does a 2007 Ford 5.4 take?
7 quarts
Capacity: 7 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
Is it bad to use synthetic blend instead of full synthetic?
For most vehicles, synthetic blend is a good choice. If your vehicle speficies that full synthetic is required, then a synthetic blend will not be okay – it could actually leave your engine vulnerable to damage.
