What kind of oil does a 2010 Honda Crosstour take?
The 2010 Honda Crosstour takes 0W-20 synthetic motor oil. This lightweight, low-viscosity oil is recommended by Honda for optimal engine performance and fuel efficiency in this model year.
Detailed Explanation
The 2010 Honda Crosstour is a midsize crossover SUV that was produced from 2009 to 2015. Honda engineers designed this vehicle to provide a balance of passenger space, cargo capacity, and on-road driving dynamics. To ensure the Crosstour's 3.5-liter V6 engine runs smoothly and efficiently, Honda specifies the use of 0W-20 synthetic motor oil.
The "0W-20" designation refers to the oil's viscosity, or thickness, at different temperatures. The "0W" means the oil has a very low viscosity when the engine is cold, allowing for easy cold starts and rapid oil circulation. The "20" indicates the oil's viscosity at normal operating temperatures. This low-viscosity formulation helps improve fuel economy while still providing adequate lubrication.
Oil Change Interval
Honda recommends changing the oil and filter in a 2010 Crosstour every 7,500 miles or 12 months, whichever comes first. Using the specified 0W-20 synthetic oil and following this maintenance schedule will help ensure the engine in your Crosstour runs reliably for many years.
Tips for Proper Oil Maintenance
- Always use a Honda-approved 0W-20 synthetic motor oil.
- Check the oil level regularly and top up as needed between changes.
- Dispose of used oil and filters properly at an authorized recycling center.
- Consider using a high-mileage or premium synthetic oil for added engine protection.
Proper oil maintenance is crucial for the long-term health and performance of your 2010 Honda Crosstour's engine. By following Honda's recommendations, you can help ensure your Crosstour runs smoothly for many miles to come.
What is the best oil for a Honda 2010?
Honda calls for 5w20/0w20.
How much oil does a Honda Accord Crosstour 3.5 take?
4.3 l
Can my car use regular oil instead of synthetic?
When it comes to doing oil changes, switching between synthetic and conventional oil is perfectly okay. Despite the oil myths, both oil types are compatible with each other – no engine flush needed. So, simply making the switch will not cause any damage to your engine nor impact your travels.
Do Honda's need synthetic oil?
Synthetic Oil
regular oil, it comes down to what your vehicle needs. If you're driving a used car in the Vista area, then it's possible that it will be fine with conventional oil. However, new Honda models use Honda Ultimate Full Synthetic motor oil, which is more advanced to accommodate updates in engine technology.
How many miles will a Honda Accord Crosstour last?
A standard Honda Crosstour will last around 200,000 miles with the high point at 150,000. Thus, we would place good mileage around 125,000 miles. An excellent driver will be able to reach this point with ease if there is incredible maintenance and care put into the structure of the machine.
How much oil does a 2010 Honda Crosstour take?
Capacity: 4.5 quarts (with filter). After refill check oil level.
Can I use 5W30 instead of 5W20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
Can I use 0W20 in my Honda Accord?
0W20 is fine. There's no special changeover procedure since engine oils are compatible with each other.
What is the best oil to use in a Honda engine?
American Honda recommends using Honda Genuine Motor Oil, sold and available at Honda dealers . If Honda Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner's Manual.
What oil is recommended for Honda Crosstour?
Mobil 1 – Advanced 0W-20 Fuel Economy Motor Oil, 5 Quart (Part No. 44967)
