How much oil does a 2009 FG Falcon take?
The amount of oil a 2009 FG Falcon takes depends on the engine fitted. The common 4.0L Barra inline-six uses about 6.0 liters of engine oil with a filter, while the V8 variants require more—around 8.0 liters. Always verify with the owner's manual or a service sheet for your exact build.
Engine options in the 2009 FG Falcon
The FG Falcon lineup includes several engines, and the oil capacity varies by configuration. The following figures cover the main options found in 2009 models.
- 4.0L Barra inline-six (the standard engine in most FG Falcons): approximately 6.0 L (about 6.3 quarts) of oil with the filter installed.
- 5.4L Boss V8 (found in higher-performance FPV/GT variants): roughly 8.0 L (about 8.5 quarts) of oil with the filter installed.
Capacities can vary slightly with oil grade and any engine modifications. Always confirm the exact requirement for your vehicle from the official manual.
How to check and change the oil
When performing an oil change, use the recommended grade (typically 5W-30 or similar as specified in the manual), install a new filter, and fill gradually to the full mark on the dipstick. Recheck the level after a short idle and top up if necessary.
Summary
For the 2009 FG Falcon, expect about 6.0 L of oil for the 4.0L Barra I6 and around 8.0 L for the V8 variants. Always refer to the specific manual for your vehicle to confirm the exact capacity and recommended oil grade, and follow the dipstick guidance to ensure proper fill.
