What kind of oil does a 2010 Toyota Highlander 2.7 take?
The 2010 Toyota Highlander 2.7 takes 5W-30 motor oil. This is the recommended oil type and viscosity for this specific model year and engine size of the Toyota Highlander SUV.
Detailed Explanation
The 2010 Toyota Highlander is a midsize SUV that was available with a 2.7-liter four-cylinder engine. For this engine, Toyota recommends using a 5W-30 motor oil. The 5W-30 designation refers to the oil's viscosity, which determines how easily the oil flows at different temperatures.
The "5W" part of the designation means the oil has a viscosity of 5 when the engine is cold, allowing for easy cold starts. The "30" part means the oil has a viscosity of 30 when the engine is at normal operating temperature. This 5W-30 viscosity provides the right balance of flow and protection for the Highlander's 2.7-liter engine.
Why 5W-30 Oil?
- Provides good cold-weather performance and easy starting
- Maintains proper lubrication at normal engine operating temperatures
- Meets Toyota's specifications for the 2.7-liter four-cylinder engine
- Helps improve fuel economy compared to heavier 10W-30 or 10W-40 oils
It's important to always use the recommended oil type and viscosity grade specified by the vehicle manufacturer. Using the wrong oil can lead to increased wear, reduced fuel efficiency, and potentially even engine damage over time.
What kind of oil does a 2009 Toyota Highlander 2.7 take?
What is the Correct Toyota Highlander Oil Type? If you drive a newer Toyota Highlander, we recommend you opt for fully synthetic 0w-20 oil. If you drive an older Toyota Highlander, go for the full synthetic 5w-30.
How often should you change the oil in a 2010 Toyota Highlander?
every 3,000-5,000 miles
Toyota recommends getting your Toyota Highlander oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed every 7,500 - 10,000 miles.
How much oil does a 2010 Toyota Highlander 2.7 take?
The 2010 Toyota Highlander 2.7L 4-cylinder engine oil capacity is 4.7 US quarts (4.4 liters). The 2010 Toyota Highlander 3.5L V6 engine oil capacity is 6.4 US quarts (6.1 liters).
What kind of oil does a 2010 Toyota Highlander take?
Oil Grade: API*
| Viscosity: | 5W-20 (All TEMPS) - Without towing package. 5W-30 (All TEMPS) - With towing package. |
|---|---|
| Capacity: | 6.4 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What grade of fuel does Toyota Highlander use?
You must only use unleaded gasoline. Select octane rating 87 (Research Octane Number of 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking.
Does Toyota Highlander use a lot of gas?
2022 Highlander Driving Range
The 2022 Highlander has more than 510 miles of driving range on one full tank of gas. For each model that uses front-wheel drive, they get an estimated EPA of 29mpg on the highway and 21mpg city.
Do Toyotas need full synthetic oil?
Most Toyota vehicles use synthetic or conventional motor oil. To verify which type of motor oil your vehicle needs, please take a look at the Owner's Manual for your particular vehicle.
How much oil does a 2.7 V6 engine take?
6.0 qt
Capacities and Specifications - 2.7L EcoBoost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant | 15.1 qt (14.3 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Front axle fluid (Four-wheel drive) | 3.5 pt (1.7 L) |
What oil does Toyota recommend for Highlander?
For new Highlander models, Toyota Genuine full synthetic 0w-20 is the recommended formula. For older Highlander models, Toyota Genuine full synthetic 5w-30 is preferred. Both types of oil are designed to flow well in both high and low temperatures, so you can enjoy great performance all year round in Smyrna.
What kind of oil does a 2013 Toyota Highlander 2.7 take?
SAE 0W-20
Oil Grade: API*
0W-20, 5W-20 (All TEMPS) - SAE 0W-20 is preferred.
