What kind of oil does a 2013 Ford Fusion 1.6 L take?
The 2013 Ford Fusion 1.6 L EcoBoost requires SAE 5W-20 engine oil, preferably full synthetic, meeting Ford’s lubrication standard. The fill is about 4.5 quarts with the filter.
Below is a detailed guide covering the recommended oil grade, acceptable formulations, capacity and change intervals, and where to buy suitable products for this engine.
Oil Type and Specifications
Key requirements for the 1.6 L EcoBoost’s lubrication to ensure proper protection and performance.
- Viscosity: SAE 5W-20
- Oil form: Full synthetic or synthetic-blend acceptable
- Ford specification: WSS-M2C946-A (and newer WSS-M2C946-B) compliant
- API service: SN or newer (e.g., SP)
- Oil capacity: approximately 4.5 quarts with filter
Sticking to these specs helps maintain engine reliability, efficiency and warranty coverage.
Brand and Product Choices
Several reputable options meet the required specification. Choose a brand that clearly states compatibility with Ford WSS-M2C946-A/B and 5W-20 viscosity.
- Motorcraft SAE 5W-20 Full Synthetic or Synthetic Blend
- Castrol EDGE 5W-20 Full Synthetic (meets Ford specs)
- Mobil 1 5W-20 Full Synthetic (or ESP-formula variant)
- Other reputable 5W-20 oils labeled to meet Ford WSS-M2C946-A/B
Always check the product label to confirm Ford compatibility and the appropriate API rating.
Maintenance Intervals and Capacity
Oil change schedules and the engine’s capacity guide how often you should service the oil, depending on driving conditions and equipment.
- Capacity: about 4.5 quarts with filter
- Normal driving: change every 5,000–7,500 miles or per the vehicle’s oil life monitor
- Severe conditions (dusty roads, extreme heat, heavy use,/turbocharged operation): 3,000–5,000 miles
- Reset the oil life monitor after each oil change
Adhering to these intervals helps sustain turbocharger health, efficiency and engine longevity.
Summary
For a 2013 Ford Fusion with a 1.6 L EcoBoost engine, use SAE 5W-20 oil, preferably full synthetic, that meets Ford’s WSS-M2C946-A/B specification. The oil capacity is around 4.5 quarts with a filter, and typical change intervals range from 5,000 to 7,500 miles under normal conditions, sooner under severe driving. Always verify the exact specification on the oil fill cap or in the owner’s manual and choose a product that explicitly meets Ford’s WSS-M2C946-A/B standard.
What kind of oil does a 2013 Ford Fusion 1.6 take?
The correct oil for a 2013 Ford Fusion 1.6L engine is SAE 5W-20. It is recommended to use a full synthetic oil, and the engine requires approximately 4.3 quarts when changing the oil with a filter. You can verify the correct oil type by checking the oil filler cap on your specific vehicle.
- Oil Type: SAE 5W-20
- Capacity: 4.3 quarts (with filter)
- Verification: Check the oil filler cap for the specific recommendation.
- Recommendation: A full synthetic oil is a good choice, and Motorcraft is the manufacturer-recommended brand, according to eBay and Superior Ford.
How much oil does a 1.6 L engine need?
A 1.6L engine typically takes between 4.1 and 4.5 quarts (3.83.83.8 to 4.34.34.3 liters) of oil, but the exact amount varies significantly by manufacturer and model. Always check your vehicle's owner's manual for the precise capacity, required oil type, and viscosity to avoid overfilling or underfilling the engine.
- Example capacities:
- Some Ford 1.6L EcoBoost engines require 4.1 L (4.34.34.3 quarts) with a filter.
- Hyundai 1.6L turbo engines often use about 4.5 L (4.54.54.5 quarts).
- Other 1.6L engines, like some older Hyundai Accent models, may only need around 3.5 quarts.
- Why the difference? The specific oil capacity depends on the engine's design, including the size of the oil pan and internal components, as well as whether the engine is turbocharged.
- Check the manual: The most reliable way to know the exact amount is to consult your car's owner's manual. It will list the specific quantity needed, along with the correct oil viscosity (e.g., 5W-30) and any other manufacturer-specific recommendations.
What kind of oil does a 2013 Ford Focus 1.6 take?
FORD FOCUS Mk3 2011-2015 1.6 TDCi DIESEL ENGINES. 5 LITRES FULLY-SYNTHETIC ENGINE OIL 5W30 913D FORD SPEC.
Can I use 5W30 instead of 5w20 in my Ford Fusion?
Can you use 5W-30 in your 2.5L ? Absolutely and it will be 100% fine.
