What kind of oil does a 2015 Toyota Land Cruiser take?
The 2015 Toyota Land Cruiser typically uses SAE 0W-20 full-synthetic engine oil, with a total capacity of about 7.9 quarts (7.5 liters) including the filter.
In more detail, Toyota’s manual for the 2015 Land Cruiser’s 5.7-liter V8 specifies a 0W-20 viscosity for normal operation, and the oil should meet API SN or newer standards (ILSAC GF-5 or newer). The capacity figure includes the filter, and using a full-synthetic oil that meets these standards helps ensure proper lubrication and performance across temperatures. Always verify the exact requirements in your regional manual or with a Toyota dealer, especially if you operate in extreme conditions.
Official oil specification
Below are the core specifications you should follow when buying oil for the 2015 Land Cruiser. This list helps ensure compatibility and performance.
- Viscosity: SAE 0W-20
- Oil type: Full synthetic engine oil
- Certification: API SN or newer; ILSAC GF-5 or newer (GF-6 compatible oils are acceptable where approved)
- Capacity: Approximately 7.9 quarts (7.5 liters) including the filter
Take note: the numbers above reflect typical US-market specifications for the 5.7L V8 in the 2015 Land Cruiser; regional variations may exist, so always confirm with your owner's manual or dealer.
Maintenance and practical tips
Preparing for an oil change involves understanding the maintenance steps and how to monitor oil health between changes.
- Park on a level surface and allow the engine to cool before draining oil.
- Remove the drain plug and drain old oil into an appropriate container.
- Replace the oil filter with a genuine Toyota filter.
- Refill with the recommended 0W-20 full-synthetic oil to the specified capacity.
- Check for leaks, tighten the drain plug to torque specification, and recheck oil level after the engine runs a few minutes.
Following these steps helps ensure proper lubrication, avoids overfill or underfill, and maintains engine health. Always consult the owner's manual for torque specs and the exact oil capacity if you have a different market version.
How to verify the correct oil grade for your region
Because regional variations can exist, you should verify the correct viscosity and specification in your owner's manual or by contacting a Toyota dealership. If you live in extreme temperatures or operate under severe driving conditions, the dealership can confirm whether any alternate viscosity is recommended for your vehicle's usage.
Summary
The 2015 Toyota Land Cruiser typically uses SAE 0W-20 full-synthetic engine oil, with an oil capacity of about 7.9 quarts including the filter. The oil must meet API SN or newer and ILSAC GF-5 or newer standards. Always confirm the exact requirements in your regional owner's manual or with a Toyota dealer to accommodate climate and driving conditions.
What kind of oil does a 2015 Land Cruiser take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) - 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | 7.9 quarts (with filter). After refill check oil level. |
What type of oil for Toyota Land Cruiser?
Engine Oil For Toyota Land Cruiser Prado 150 10w40 Or 5w30.
What kind of oil does a 3.8 L V6 take?
5W-20
What kind of oil does a Land Cruiser V8 take?
8 liters 0W-20 Toyota Land Cruiser motor oil, oil filter, and hardware for 5.7L V8 applications. Oil carries API SQ and ILSAC GF-7A oil standard approvals (backwards compatible with API SN and ILSAC GF-5). BLAU® Toyota Land Cruiser oil change kits consist of everything to perform the highest quality oil change.
