What kind of oil does a 2016 Lexus NX take?
The 2016 Lexus NX uses 0W-20 full-synthetic engine oil across its lineup, including both the NX200t and the NX300h. This grade meets Lexus specifications and is designed to support fuel efficiency and reliable cold-start performance.
Oil specification for the 2016 Lexus NX
Lexus standardized on 0W-20 synthetic oil for the 2016 NX models to balance protection with efficiency. Drivers should use a 0W-20 full-synthetic oil that meets Lexus (or Toyota/Lexus) specifications, and avoid thicker grades unless explicitly recommended by the manual or a technician.
NX200t — 2.0L turbo
The NX200t, powered by a 2.0-liter turbo engine, is specified to run on 0W-20 full-synthetic oil. Use oil that conforms to Lexus requirements and follow the maintenance schedule outlined in the owner’s manual.
NX300h — 2.5L hybrid
The NX300h hybrid also calls for 0W-20 full-synthetic oil. The same grade that meets Lexus specifications is recommended, ensuring compatibility with the hybrid drivetrain and overall engine longevity.
How to verify and change the oil
If you want to confirm the correct oil for your specific vehicle or handling, consider these steps before changing or topping up oil:
- Consult the owner's manual section on Engine Oil or the information plate in the engine bay for the exact grade.
- Check the oil filler cap in the engine bay; it often states the recommended grade (e.g., 0W-20).
- Use a 0W-20 full-synthetic oil that meets Lexus specifications or the equivalent recommended by Lexus.
- When changing oil, replace the oil filter and reset any maintenance reminder as described in the manual.
Following these steps will help ensure you’re using the correct oil for your 2016 Lexus NX and maintain optimal engine performance.
Summary
In short, the 2016 Lexus NX requires 0W-20 full-synthetic engine oil for both the NX200t and NX300h. Always verify the grade with your owner's manual or dealer and use oil that meets Lexus specifications. Regular oil changes with the correct grade support engine efficiency and longevity across the NX lineup.
What kind of oil does a 2016 Lexus nx200t take?
The 2016 Lexus NX200t requires a fully synthetic SAE 0W-20 engine oil. If 0W-20 is not available, SAE 5W-20 can be used as a temporary alternative, but it should be replaced with 0W-20 at the next oil change. The engine oil capacity is approximately 5.2 quarts with a filter change.
- Oil Type: Full synthetic SAE 0W-20
- Alternative: SAE 5W-20 can be used temporarily if 0W-20 is unavailable, but switch back at the next oil change.
- Capacity: Approximately 5.2 quarts (with filter).
What type of oil does Lexus NX use?
Lexus recommends Lexus Genuine SAE 0W-20 Full-Synthetic motor oil for new vehicles. Older models may require Lexus Genuine 5W-30 motor oil, consult with one of our service advisors or your vehicle manual to check if you are unsure.
What motor oil does Lexus recommend?
Lexus recommends premium-grade synthetic oil across its lineup. For newer models, the preferred viscosity is 0W-20 synthetic. This oil grade has higher engine wear protection, particularly under high temperatures, and can improve fuel economy.
What kind of oil does a 2016 Lexus take?
Most new Lexus models require Toyota Genuine Motor Oil SAE 0W-20, which is a full synthetic motor oil. This is the one for the Lexus RX 350 oil type and the Lexus ES 350 oil type. Older models may require the conventional Toyota Genuine Motor Oil 5W-30.
