What kind of oil does a Dodge Challenger 3.6 V6 take?
The Dodge Challenger 3.6 V6 engine requires 5W-20 or 5W-30 motor oil. This is the recommended oil type and viscosity for this specific vehicle model and engine configuration.
Detailed Explanation
The Dodge Challenger is a popular muscle car that comes equipped with a variety of engine options, including the 3.6-liter V6 engine. This engine is designed to run on either 5W-20 or 5W-30 motor oil, which are the recommended oil types and viscosities specified by the manufacturer.
The "5W" in the oil designation refers to the oil's cold weather performance, indicating that it will flow easily at low temperatures. The "20" or "30" refers to the oil's thickness or viscosity at normal operating temperatures. 5W-20 oil is slightly thinner than 5W-30, making it a bit better suited for fuel efficiency, while 5W-30 provides a bit more protection in high-heat conditions.
- 5W-20 oil is the factory-recommended oil for the Dodge Challenger 3.6 V6 engine.
- 5W-30 oil is also an acceptable alternative if 5W-20 is not available.
- Using the correct oil type and viscosity is important for proper engine lubrication and performance.
- Consult your owner's manual or the oil fill cap on your Challenger for the specific oil recommendations.
It's important to follow the manufacturer's recommendations when it comes to engine oil to ensure your Dodge Challenger 3.6 V6 runs at its best and lasts as long as possible.
What oil does a Dodge 3.6 V6 take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
What kind of oil does a 2019 Dodge Charger 3.6 take?
Pennzoil – 5W20 Synthetic Blend Motor Oil, 1 Quart (Part No. 550022779)
What brand of oil does Dodge recommend?
Dodge and Pennzoil®
Pennzoil and Dodge have a relationship rooted in passion and trust. Dodge has a fleet of vehicles that clearly demonstrate its drive for providing the highest quality drive possible. From the Dart to the Durango, a Pennzoil formulation comes factory filled.
What oil is best for charger V6?
7th Generation Dodge Charger LD (2011-2023) Oil Guide
| Engine Variant | Recommended Oil Grade | Capacity Required |
|---|---|---|
| 3.6L V6 Engine | API Certified SAE 5W-20 engine oil | 6 quarts |
| 5.7L V8 Engine | API Certified SAE 0W-20 engine oil | 7 quarts |
| 6.2L Supercharged V8 Engine | API Certified SAE 0W-40 Fully Synthetic engine oil | 7 quarts |
How many quarts does a 3.6 L V6 take?
5.3 quarts
Capacity: 5.3 quarts Initial Fill.
What is the difference between 5W20 and 5W30?
The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film. When looking at 5W-30 vs 10W-30, they both provide the same viscosity at operating temperature, as indicated by their identical “30” ratings.
What oil does a V6 Challenger use?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.9 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
Is 3.6 liter engine good?
The overall reliability of the 3.6 Liter Pentastar V6 engine is above average and generally considered to be good. The engine has been used in various vehicles for over a decade and has proven to be reliable in most cases.
What kind of oil does a 2018 Dodge Challenger 3.6 L take?
AMSOIL Signature Series 5W-20 100% Synthetic Motor Oil
Based on independent testing of AMSOIL Signature Series 0W-20 using the ASTM D6891 standard test.
What kind of oil does a 3.6 L take?
3.6L Engine: Mopar® SAE 0W-20 Full Synthetic Engine Oil (Equivalent full synthetic SAE 0W-20 engine oil can be used, but must have the API Starburst trademark)
