What kind of oil does a Ford EcoSport 1.0 EcoBoost take?
The EcoSport 1.0 EcoBoost uses a full-synthetic motor oil, most commonly 5W-20, that meets Ford’s official specification. The exact grade and specification can vary by year and market, so it’s essential to check the owner’s manual or ask a Ford dealer for your specific vehicle.
Oil compatibility and specifications for the EcoSport 1.0 EcoBoost
The 1.0-liter EcoBoost is a compact turbo engine that relies on high-quality oil to maintain performance and efficiency. Ford generally recommends a synthetic oil with a viscosity around 5W-20. In some regions and model years, 0W-20 may also be approved if it meets Ford’s specification. The critical requirement is that the oil meets Ford’s official specification (often listed as WSS-M2C946-A or its current equivalent). Always verify the exact specification for your vehicle’s VIN and year, since the spec can evolve with updates.
- Viscosity: 5W-20 is the common recommended grade; 0W-20 may be approved in certain markets or model years if it meets Ford’s spec.
- Specification: Oil must meet Ford’s WSS-M2C946-A (or the current equivalent) or an equivalent approved by Ford for the 1.0 EcoBoost.
- Capacity: The engine oil capacity, including the filter, is typically around 3.0 liters (roughly 3.2 quarts).
- Oil type: Synthetic or high-quality synthetic-blend motor oil as approved by Ford.
- Change interval: With synthetic oil, Ford commonly recommends roughly 10,000 miles (16,000 km) or 12 months, whichever comes first, though regional schedules may vary based on climate and driving conditions.
Bottom line: Always confirm the precise grade, spec, and service interval for your EcoSport by checking the owner's manual or contacting a Ford dealer.
Market and model-year variations
Oil requirements can shift with new engine calibrations or regional regulations. European-market EcoSports with the 1.0 EcoBoost have historically aligned with Ford’s standard 5W-20 synthetic, while some markets may list 0W-20 as acceptable. The safest approach is to use Ford-approved oil that matches the current WSS-M2C946-A specification or its up-to-date equivalent for your year. Dealers can pull the exact spec by VIN.
Practical steps to determine the exact oil for your car
To ensure you select the correct oil, follow these steps. The following checklist helps you confirm the exact grade, spec, and capacity suitable for your specific vehicle.
- Check the owner's manual or the oil specification label under the hood or in the service booklet for the exact grade and Ford specification required for your model year and market.
- If in doubt, contact a Ford dealer or authorized service center and provide your VIN to obtain the precise specification.
- Bookmark Ford’s official owner portal or service information resources to verify the current recommended oil specification for your engine.
- Choose a reputable full-synthetic motor oil that explicitly states compatibility with Ford WSS-M2C946-A or the current equivalent.
- Ensure the oil change interval aligns with your climate and driving conditions; severe service may require more frequent changes.
Bottom line: The EcoSport 1.0 EcoBoost relies on a synthetic oil that matches Ford’s official specification, with 5W-20 being the typical viscosity in many markets. Always verify the exact grade and spec for your vehicle year and region to maintain performance and warranty coverage.
Summary
In brief, use synthetic 5W-20 oil that meets Ford’s current specification (commonly WSS-M2C946-A or equivalent) for the EcoSport 1.0 EcoBoost. The oil capacity is about 3.0 liters with a filter, and typical change intervals are around 10,000 miles or 12 months, adjusted for climate and driving conditions. Always consult the owner’s manual or a Ford dealer for your exact year and market requirements.
