Loading

What kind of oil does a GM 3.6 V6 take?

The recommended oil for a GM 3.6L V6 engine is typically 5W-30 or 5W-20 synthetic motor oil. This engine is commonly found in various GM vehicles, including the Chevrolet Traverse, Buick Enclave, and GMC Acadia.


Detailed Recommendations for GM 3.6L V6 Engine Oil


The GM 3.6L V6 engine is a popular and widely used powertrain in many of General Motors' mid-size and full-size SUVs and crossovers. To ensure optimal performance and longevity, it's important to use the recommended engine oil specifications for this engine.



  • Recommended Oil Type: 5W-30 or 5W-20 synthetic motor oil

  • Oil Capacity: Approximately 6 quarts (5.7 liters)

  • Approved Oil Specifications: GM dexos1™ Gen 2 or equivalent

  • Viscosity Grade: 5W-30 or 5W-20


The 5W-30 or 5W-20 viscosity grades are recommended to provide the necessary lubrication and protection for the engine, especially during cold weather starts. The dexos1™ Gen 2 specification ensures the oil meets GM's strict quality and performance standards for this engine.


Why the Recommended Oil Matters


Using the correct engine oil is crucial for the proper operation and longevity of the GM 3.6L V6 engine. The recommended oil provides the following benefits:



  • Improved Fuel Efficiency: The lower viscosity 5W-20 or 5W-30 oils help reduce engine drag, resulting in better fuel economy.

  • Enhanced Wear Protection: The synthetic formulation and approved specifications ensure the oil provides superior wear protection for critical engine components.

  • Reduced Emissions: The oil's composition helps the engine meet strict emissions standards.

  • Longer Engine Life: Proper lubrication and protection from the recommended oil can extend the overall lifespan of the 3.6L V6 engine.


It's important to always refer to the owner's manual or consult with a qualified mechanic to ensure you are using the correct engine oil for your specific GM 3.6L V6-equipped vehicle.

What kind of oil does a Chevy Colorado 3.6 take?


5W-30
AMSOIL 5W-30 100% Synthetic High-Mileage Motor Oil.



What motor oil does Chevy recommend?


For a gasoline engine, we recommend SAE 5W-30 Dexos1 full synthetic oil.



What kind of oil does a 3.6 L V6 take?


The 3.6L Pentastar® V6 engine takes a synthetic blend oil. It's preferred that you use one with an oil weight of SAE 0W-20. If you've got the 5.7L HEMI® engine, however, you'll want to use synthetic oil that's got a weight of SAE 5W-20.



What is Dexos oil 5w30?


Dexos oil is made from synthetics or synthetic blends. The idea behind creating dexos oil was to provide exceptional motor cleaning, increased gas mileage, extended drain interval, and reduced sludge formation.



Does Chevy Colorado use synthetic oil?


The Proper Chevy Colorado Oil Type
As we mentioned earlier, late-model Colorado vehicles use 5W-30 synthetic oil. Earlier models might recommend 0W-30 synthetic oil. You might also see this oil recommended if you enjoy off-roading or use your truck for certain other specialized purposes.



What is Dexos oil?


Dexos® oils are formulated exclusively with synthetics or synthetic blends. Better antioxidant technology that keeps oil from oxidizing. Dexos® oils generally have a drain interval of up to 15,000 miles. Lower viscosity that holds up to engine combustion and heat better and longer than other oils on the market.



Is a 3.6 L V6 good?


The overall reliability of the 3.6 Liter Pentastar V6 engine is above average and generally considered to be good. The engine has been used in various vehicles for over a decade and has proven to be reliable in most cases.



How much oil does a GMC 3.6 L V6 take?


6 quarts
The GMC Acadia oil capacity is 5 quarts for the 2.0L engine and 6 quarts for the 3.6L V6.



How much oil does a Buick 3.6 hold?


around 6 quarts
The Buick Enclave oil capacity varies slightly depending on the model year and engine type. However, for most recent models equipped with the 3.6L V6 engine, the oil capacity is typically around 6 quarts (5.7 liters) with a filter change.



What kind of oil does a Chevy 3.6 take?


Oil Grade: SEOC3

Viscosity:0W-30 (Below -29°C) 5W-30 (All TEMPS)
Capacity:6 quarts (with filter). After refill check oil level.
Torque:18 ft/lbs (Oil Drain Plug) Replace drain plug seal.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.