What kind of transmission fluid does a Dodge 46RE take?
The Dodge 46RE typically uses Dexron-family automatic transmission fluid, most commonly Dexron II-D or Dexron III-M. Always confirm the exact specification for your year and VIN in the owner's manual or through Chrysler/Marker service documentation for your vehicle.
Understanding the standard specifications
The 46RE is a Chrysler-designed four-speed automatic used in various Dodge and Ram applications from the mid-1990s to the early 2000s. Over its production run, the recommended ATF variant could vary slightly by model year, so drivers should verify the precise requirement for their vehicle before a fluid change.
- Dexron II-D (DEXRON II-D)
- Dexron III-M (DEXRON III-M)
These Dexron formulations cover most 46RE installations across its service life. For accuracy, always verify the correct specification for your specific vehicle.
How to confirm the exact fluid for your vehicle
Use these steps to ensure you’re using the right fluid for your 46RE:
- Consult the owner's manual or factory service information for your exact year/VIN to identify the recommended ATF specification (often Dexron II-D or Dexron III-M).
- Inspect the transmission dipstick or reservoir label, if available, for the recommended fluid type or code.
- If you’re unsure, contact a Dodge/Chrysler dealer or a qualified transmission shop with your VIN to confirm the precise specification.
- When replacing fluid, use only the specified ATF and avoid mixing types unless the service information allows it.
Using the correct fluid helps maintain smooth shifting and transmission longevity; incorrect fluid can cause slipping, delayed engagement, or damaged seals.
Summary
The Dodge 46RE generally requires Dexron II-D or Dexron III-M automatic transmission fluid, with exact requirements varying by year and VIN. Always verify with the owner’s manual or a dealer to ensure you use the correct specification, and follow maintenance guidelines to keep the transmission healthy.
What's the difference between 46RE and 47RE?
Um a 518 and a 46RH are essentially the exact same transmission. They're hydraulically controlled uh four-speed transmission. So that's a 3-speed with an overdrive. Um and then the predecessor of that
What type of transmission fluid does a 46RE transmission take?
Transmission Fluid
| Manufacturer | Transmission Type | Transmission Fluid |
|---|---|---|
| DODGE | 46RE | ATF +4 |
| JEEP | 46RE | ATF +4 |
Can I use ATF 4 instead of ATF?
No, you cannot use a standard automatic transmission fluid (ATF) instead of ATF+4. Using the wrong fluid can cause performance issues, damage the transmission, and void the warranty. Always use the specific ATF+4 fluid recommended by the vehicle manufacturer, which is especially important for Chrysler, Dodge, and Jeep vehicles, as only licensed brands meet the strict specifications, notes the Center for Quality Assurance.
Why you should not substitute ATF+4
- Performance and damage: General ATF is formulated differently and can cause the transmission to slip, shift roughly, and wear out prematurely.
- Warranty issues: Using a non-approved fluid may void your vehicle's warranty.
- Specific requirements: ATF+4 is a licensed specification designed for specific performance and protection of certain automatic transmissions.
- Licensing: Only fluids that have been licensed through the Center for Quality Assurance are certified to meet the official ATF+4 specifications.
What to do instead
- Check your owner's manual: Always refer to your owner's manual for the correct fluid specification for your vehicle.
- Use the correct fluid: Purchase an ATF+4 fluid from a reputable source, such as a dealer or an automotive parts store.
- Ensure licensing: Look for brands that are officially licensed as ATF+4, and be wary of generic fluids claiming to be a substitute.
What kind of transmission fluid does a 2001 Dodge Ram 1500 take?
Valvoline ATF +4 Full Synthetic Automatic Transmission Fluid 1 Quart.
