What kind of transmission fluid does a Ford Fusion 2013 take?
The 2013 Ford Fusion takes Motorcraft MERCON LV automatic transmission fluid. This is the recommended transmission fluid for this vehicle model and year.
Detailed Information on the 2013 Ford Fusion Transmission Fluid
The 2013 Ford Fusion is equipped with a 6-speed automatic transmission. Ford specifies that this transmission requires the use of Motorcraft MERCON LV fluid. This is a high-performance, low-viscosity automatic transmission fluid designed for use in Ford's 6-speed and newer automatic transmissions.
Some key points about the transmission fluid for a 2013 Ford Fusion:
- Recommended fluid: Motorcraft MERCON LV
- Transmission type: 6-speed automatic
- Fluid capacity: Approximately 6.9 quarts
- Fluid change interval: Refer to the owner's manual, but typically every 30,000 miles or 2 years
- Using the correct fluid is important for proper transmission operation and longevity
It's important to always refer to the owner's manual for the specific fluid recommendations and service intervals for your 2013 Ford Fusion. Improper transmission fluid can lead to issues like slipping, shuddering, or even transmission failure over time.
How much transmission fluid does a Ford Fusion take?
Capacities and Specifications - 2.5L
| Item | Capacity |
|---|---|
| Engine oil (with oil filter). | 5.7 qt (5.4 L) |
| Engine coolant. | 7.2 qt (6.8 L) |
| Brake fluid. | Between MIN/MAX on brake fluid reservoir |
| Automatic transmission fluid.* | 9.0 qt (8.5 L) |
What kind of transmission fluid for a 2013 Ford Fusion?
Commonly recommended manual transmission fluid formulations include SAE 80W, 75W-90, 80W-90 and SAE 90. In some cases, a multi-grade engine oil or automatic transmission fluid may be recommended. However, a manual transmission fluid is typically the most optimal for manual transmissions.
How much transmission fluid do I need for a Ford Focus 2013?
A 2013 Ford Focus transmission flush also uses about 10 quarts of fluid to specifically clean and flush out the system.
What kind of transmission fluid does a 2013 Ford take?
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No. F426)
What kind of transmission is in the 2013 Ford Fusion?
A six-speed automatic with paddle shifters is mated to this engine, and this powertrain is the only one with available all-wheel drive. EPA fuel economy estimates range from 22/31 mpg city/highway for the AWD 2.0-liter EcoBoost model to 25/37 mpg for the 1.6-liter EcoBoost engine and manual transmission.
What transmission fluid does Ford recommend?
MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application. The different MERCON® fluids are unique fluids formulated for specific applications.
