What size are the wheel nuts on a Toyota Yaris?
On most Toyota Yaris models, wheel nuts use a metric M12 x 1.5 thread with a conical (tapered) seat, and the standard lug wrench size is 19 mm. However, exact specs can vary by generation and any aftermarket wheels, so it’s best to verify for your specific vehicle.
Wheel nuts (lug nuts) secure the wheel to the hub and come in different seat designs and thread pitches. The key details to know are the thread size (M12 x 1.5 for the Yaris in most cases), the seat type that matches the wheel, and the correct tool size to install or remove them. Getting these right helps prevent cross-threading and damage to studs or wheels.
Common lug nut specifications for the Yaris
The following summarizes the standard specifications you are most likely to encounter on a Toyota Yaris.
Standard thread, seat, and tool size
- M12 x 1.5 thread size with a conical (tapered) seat
- Nut hex size (tool to remove): typically 19 mm
- Most original equipment lug nuts for Yaris are acorn-style (cone seat) and compatible with 19 mm sockets
Note: Some trims or aftermarket wheels might use a different lug nut diameter or seat type and may require a different socket size, such as 21 mm. Always verify against your wheel specifications or owner's manual.
How to confirm the exact lug nut size for your Yaris
To ensure you have the correct specs for your specific vehicle and wheel setup, follow these steps.
Verification steps
- Check the owner's manual for lug nut size, torque, and seat type information
- Inspect the lug nuts on your wheels for stamped size (some nuts have M12 x 1.5 or similar markings)
- Measure the hex size with a ruler or use a 19 mm socket and attempt to fit; if it rounds, you may need a different size
- Ask your Toyota dealer or a professional mechanic, especially if you have aftermarket wheels or spacers
Getting the precise spec protects you from cross-threading and ensures proper torque when tightening nuts.
Summary
Most Toyota Yaris models use M12 x 1.5 wheel lug nuts with a conical seat, and a 19 mm socket is typically used to install or remove them. Always confirm your exact spec if you have aftermarket wheels or different trim years, and consult the owner's manual or a dealer if in doubt.
What size is a Toyota wheel wrench?
The standard Toyota wheel wrench size is 21mm (or 13/16 inch). Most factory Toyota lug nuts for sedans and smaller SUVs use a 21mm socket. However, it's always best to check your vehicle's specific model and year, as some larger trucks or different configurations may have a different size.
What to check for
- Check your lug nuts: The most reliable way to confirm the size is to remove one of your lug nuts and measure it.
- Don't rely on the socket cover: Some lug nuts have a thin tin cover that can be damaged, making it difficult to get the correct fit. It's better to use a reliable measurement method than to trust the visual appearance of the cover, notes bonoss.
- Consider your vehicle's needs: If you are using an impact wrench, a 1/2-inch drive is recommended for most passenger cars and light trucks, while larger trucks and SUVs may require a 3/4-inch drive.
What size are the lug nuts on a Toyota Yaris?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (sold by each) (Part No. 611-182)
What size are the wheel nuts on a 2013 Toyota Yaris?
M12 X 1.5 21MM HEX.
What size socket is a Toyota wheel nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
