What lug pattern is a 2010 Ford Fusion?
The 2010 Ford Fusion uses a 5-lug pattern on a 114.3 mm (4.5 inch) bolt circle.
For Ford's mid-size sedan from 2010, wheels attach with five studs arranged on a circle 114.3 millimeters in diameter. This 5x114.3 bolt pattern is common across many Ford models from that era and is a standard reference when replacing wheels or rotors. This article explains the exact specification and how to verify it on your vehicle.
Exact lug pattern for the 2010 Fusion
The standard specification for the Fusion in 2010 is a five-lug configuration with a 114.3 mm bolt circle, or 5x114.3. Wheels designed for this pattern will bolt on without modification, provided the center bore and offset also match your car's requirements. When shopping for wheels, you’ll often see 5x114.3 listed; that designation confirms compatibility with the Fusion's lug pattern.
How to verify the lug pattern on your Fusion
Before purchasing wheels or tires, confirm the lug pattern to avoid fitment issues. Use these methods:
- Check the wheel itself for a stamp that reads 5x114.3 or 5-114.3, or look for a similar specification on the wheel box or online listing.
- Consult the owner's manual or the door jamb placard, which often lists wheel lug pattern and bolt circle size.
- Measure directly: count the lug holes (the Fusion has five) and measure the diameter from the center of one lug hole to the opposite lug hole across the center to confirm 114.3 mm (4.5 inches).
Knowing the lug pattern is essential for safe handling and proper seating of the wheel. If you plan to rotate tires or purchase aftermarket wheels, verify the pattern, offset, and hub bore to ensure compatibility with the 2010 Fusion.
Similar lug patterns across Ford models
While the Fusion uses 5x114.3, several other Ford models from the same era used the same bolt pattern, which can simplify wheel replacements for owners who own multiple Ford vehicles. Always verify per-wheel specifications to account for differences in center bore and offset.
Additional considerations for wheel fitment
While the lug pattern is the primary concern, other fitment factors also matter when replacing wheels:
- Center bore size: should match or be larger than the hub to center the wheel properly; a smaller bore requires hub-centric rings.
- Wheel offset: affects brake clearance, fender clearance, and alignment; mismatches can cause rubbing or steering feel changes.
- Wheel bore and hub ring compatibility: ensure no interference with the wheel and brake assembly.
With the correct lug pattern and attention to offset and center bore, your 2010 Fusion can accommodate a wide range of wheels designed for 5x114.3 patterns.
Summary
The 2010 Ford Fusion uses a 5-lug, 114.3 mm (4.5 inch) bolt pattern, commonly listed as 5x114.3. Verify this specification on the vehicle via the manual, door placard, or current wheels, and check offset and center bore when selecting aftermarket wheels to ensure proper fit and safety.
