What oil does a 1988 Honda Prelude take?
As a proud owner of a classic 1988 Honda Prelude, ensuring that your vehicle runs smoothly and efficiently is essential. One of the most critical aspects of maintaining your Prelude is using the right type of engine oil. In this article, we will explore the recommended oil specifications for your 1988 Honda Prelude, helping you keep your engine in top condition.
Recommended Oil Type
The 1988 Honda Prelude typically requires 10W-30 motor oil. This viscosity grade is suitable for a range of temperatures, providing adequate protection and performance for your engine. However, depending on your local climate and driving conditions, you might also consider using 5W-30 oil, which offers better cold-start performance.
Oil Specifications
When selecting oil for your Prelude, it's essential to consider the following specifications:
- API Rating: Look for oil that meets or exceeds the API (American Petroleum Institute) service classification of SG or higher.
- Synthetic vs. Conventional: While conventional oil is perfectly acceptable, synthetic oil can provide better protection and performance, especially in extreme temperatures.
- Oil Change Interval: Regular oil changes are crucial. For the 1988 Prelude, it's generally recommended to change the oil every 3,000 to 5,000 miles, depending on driving habits and conditions.
Conclusion
Using the correct oil type and maintaining regular oil changes will help ensure that your 1988 Honda Prelude remains reliable and performs at its best. Always consult your owner's manual for specific recommendations and consider reaching out to a trusted mechanic if you have any questions about your vehicle's maintenance needs.
Frequently Asked Questions
Does h22 have VTEC?
The H23A DOHC VTEC has 87 mm × 95 mm (3.43 in × 3.74 in) (bore and stroke) and the H22A DOHC VTEC has 87 mm × 90.7 mm (3.43 in × 3.57 in) (bore and stroke).
How much oil does a d16 engine take?
Oil Grade: API*
| Viscosity: | 10W-30 (Above -7°C) 5W-30 (All TEMPS) - SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 3.2 quarts. w/of. After refill check oil level. |
| Capacity: | 3.5 quarts (with filter). After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
What oil should I use in a Honda small engine?
SAE 10W-30 Motor Oil. Honda Genuine quality SAE 10W-30 grade oil is formulated for use in 4-cycle engines. Formulated to meet the unique needs of power equipment.
How much oil does a Honda Prelude 2.0 take?
4.1 quarts
Capacity: 4.1 quarts (with filter).
What engine is in a 1988 Honda Prelude?
HONDA Prelude 2.0L 5MT FWD (109 HP)
| ENGINE SPECS - 2.0L 5MT FWD (109 HP) | |
|---|---|
| Cylinders: | L4 |
| Displacement: | 1958 cm3 |
| Power: | 80 KW @ 5800 RPM 109 HP @ 5800 RPM 107 BHP @ 5800 RPM |
| Torque: | 114 lb-ft @ 4000 RPM 154 Nm @ 4000 RPM |
How many quarts of oil does a H22 take?
Oil Grade: API*
| Viscosity: | 10W-30 (Above -20°C) - SAE 10W-30 is preferred. 5W-30 (Below 0°C) |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Capacity: | 4.8 quarts. w/of. After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
How much oil does a 1988 Honda 300 take?
NOTE: Honda specifies that the TRX300 engine takes 2.4 quarts of GN4 10W40 oil.
What kind of oil does a 1998 Honda Prelude take?
Oil Grade: API*
| Viscosity: | 10W-30 (Above -10°C) 5W-30 (Below 35°C) |
|---|---|
| Capacity: | 4.8 quarts. w/of. After refill check oil level. |
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
Is Prelude a VTEC?
Honda Prelude Took the VTEC Engine to a Whole New Level
This feature trickled down from the Acura NSX supercar and later spread to other members of the Honda range, including the Civic.
What type of oil does a 300 take?
AMSOIL 5W-20 100% Synthetic High-Mileage Motor Oil.
