What oil does a 2009 Dodge Nitro take?
The 2009 Dodge Nitro takes 5W-20 motor oil. This is the recommended oil type and viscosity for this vehicle according to the manufacturer's specifications.
Detailed Information on the 2009 Dodge Nitro Oil Recommendations
The 2009 Dodge Nitro is a mid-size SUV that was produced by Dodge. It was available with either a 3.7-liter V6 or a 4.0-liter V6 engine. The recommended oil type for both engine options is 5W-20 motor oil.
The 5W-20 oil specification means that the oil has a viscosity of 5 when the engine is cold (the "W" stands for "winter") and a viscosity of 20 when the engine is at normal operating temperature. This type of oil is designed to flow easily when the engine is cold, while also providing sufficient lubrication at higher temperatures.
Using the recommended 5W-20 oil is important for the proper functioning and longevity of the 2009 Dodge Nitro's engine. Using a different oil type or viscosity could lead to increased wear, reduced fuel efficiency, and other potential issues.
Oil Change Interval for the 2009 Dodge Nitro
Dodge recommends changing the oil and filter in the 2009 Nitro every 3,000 to 5,000 miles, or every 3 to 6 months, whichever comes first. It's important to follow the manufacturer's recommended oil change interval to ensure the engine continues to operate at its best.
Regularly changing the oil and filter is crucial for maintaining the health and performance of the 2009 Dodge Nitro's engine. Neglecting oil changes can lead to increased wear, reduced fuel efficiency, and even engine failure over time.
What kind of oil does a 2009 Dodge Nitro take?
Dodge Nitro recommended engine oil: SAE 5W-20, API Certified or 5w-30.
How much oil does a 4.0 Dodge Nitro take?
6 quarts
Capacity: 6 quarts (with filter).
What oil does Dodge recommend?
7th Generation Dodge Charger LD (2011-2023) Oil Guide
| Engine Variant | Recommended Oil Grade | Capacity Required |
|---|---|---|
| 3.6L V6 Engine | API Certified SAE 5W-20 engine oil | 6 quarts |
| 5.7L V8 Engine | API Certified SAE 0W-20 engine oil | 7 quarts |
| 6.2L Supercharged V8 Engine | API Certified SAE 0W-40 Fully Synthetic engine oil | 7 quarts |
What is the gas mileage on a 4.0 Dodge Nitro?
The fuel economy is a disappointing 16 mpg in the city and 20 mpg on the highway for a four-wheel drive model with the 4-liter.
What gas does a Dodge Nitro use?
Engine Speed 6000 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane Oil Capacity 3.7 L (5.0 qt.) Coolant Capacity 13.25 L (14.0 qt.)
How much oil does a 2.8 L engine take?
4.5 Qt
Customer: how much oil does a 2.8 v6 take for an oil and filter chane? GM Grand Master Technician 2007. 14 years experience. WelcomeCustomer The approximate oil capacity for an oil change with the filter is 4.3L or 4.5 Qt of 5w30 oil.
Does Dodge use synthetic oil?
Again, there's no manufacturer we're aware of that makes this recommendation. Chrysler, Jeep, Dodge, Ram, Mercedes-Benz, Porsche, Corvette, Volkswagen, Hyundai and many other manufacturers' vehicles come from the factory with synthetic oil. Myth: Using a synthetic oil voids a car's warranty.
How much oil does a Dodge Nitro 2.8 take?
6.6 L
Your DODGE NITRO 2.8 CRD 4WD will take 6.6 L for a full oil change.
Can I put 5w30 instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
What oil does a 4.0 take?
The 4.0L is an extremely durable and well-tested mill. It would likely run fine on almost any engine oil. However, the viscosity of the oil recommended for your 4.0L is dependent on the ambient temperature. For temperatures that range from 0 to above 100 degrees, you'll want to use 10W-30 in your 4.0L.
