What oil does a 2010 Ford Flex take?
For a 2010 Ford Flex, the recommended engine oil grade is 5W-20.
In more detail, the 3.5-liter V6 engine in most 2010 Flex models calls for 5W-20 motor oil, with synthetic blend or full synthetic acceptable. Use oil that meets Ford specification WSS-M2C930-A (or the most current revision for your vehicle). The typical oil capacity is about 5.5 to 6 quarts with a filter. Always verify exact capacity and spec in the owner's manual or on the oil fill cap, since variations can exist by trim or engine option.
Recommended oil grade and specifications
Key details to verify before you purchase oil:
- Grade: 5W-20
- Type: synthetic blend or full synthetic
- Ford specification: WSS-M2C930-A (or the most current revision applicable to your vehicle)
- Capacity: approximately 5.5–6 quarts (with filter); check dipstick and manual for the exact figure
Bottom line: Use 5W-20 oil meeting Ford's WSS-M2C930 specification, in the correct quantity, and follow the maintenance schedule in your manual.
Oil change intervals and tips
Oil change intervals depend on oil type and driving conditions. Typical ranges for the 2010 Flex are:
- Conventional or mineral oil: about every 3,000–5,000 miles
- Synthetic or synthetic-blend oil: commonly every 7,500–10,000 miles under normal conditions
- Severe driving conditions (short trips, heavy towing, extreme temperatures): more frequent changes
Bottom line: Follow Ford’s interval guidance in the owner's manual or the vehicle’s oil life monitor and adjust for your driving conditions and oil choice.
Summary
The 2010 Ford Flex typically uses 5W-20 motor oil that meets Ford WSS-M2C930 specifications, with an oil capacity of roughly 5.5–6 quarts including a filter. Synthetic oils can extend change intervals under normal use, but severe conditions warrant shorter intervals. Always consult the owner's manual or the oil filler cap for the exact specification and capacity for your specific vehicle.
What kind of oil goes in a 2010 Ford Flex?
Mobil 1 Full Synthetic Engine Oil 5W-20 6 Gallon.
What kind of oil goes in a Ford Flex?
The Ford Flex oil type is generally 5W-20 or 5W-30, depending on the model year and specific engine. For colder climates, some models may require 0W-30 oil, and it's crucial to check your owner's manual for the exact recommendation and any specific certifications (like WSS-M2C961-A1). The oil capacity is typically 6 quarts, but this can vary by model, so always check your manual before changing the oil.
General oil recommendations
- Standard: Use 5W-20 or 5W-30.
- Cold Climate: Use 0W-30 if temperatures are consistently below -22∘Fnegative 22 raised to the composed with power cap F−22∘𝐹 (-30∘Cnegative 30 raised to the composed with power cap C−30∘𝐶).
- Capacity: The typical capacity is 6 quarts, but confirm with your owner's manual for your specific model.
How to determine the correct oil
- Consult your owner's manual: This is the most reliable source for your vehicle's specific needs.
- Check the oil cap: The correct viscosity is often printed on the oil filler cap.
- Consider your climate: The viscosity recommended for your vehicle may change based on your local temperature range.
How many quarts of oil does a Ford Flex take?
A Ford Flex takes 6 quarts of oil with the filter for most models, including the 3.5L V6 engine. However, some specific models may vary, such as the 2010 model year, which might require 5.5 quarts. It's always best to consult your owner's manual to confirm the exact capacity for your specific vehicle.
- Most models: 6 quarts (with filter)
- Potential exception: 5.5 quarts for some model years, like the 2010
- Important: Always check your owner's manual for the most accurate information for your specific model and engine.
- After refilling: Always check the oil level using the dipstick after adding the new oil to ensure the correct amount is used.
Can I use 5W-30 instead of 5W20 in my Ford Escape?
Oil viscosity is only really relevant when you're under manufacturer's warranty. After warranty you can use whatever you want. I have a 2017 which calls for 5W20, but I use 5W30.
