How much does a 1940 Ford 9N tractor weight?
A 1940 Ford 9N tractor weighs roughly 1,900–2,000 pounds (860–910 kg) in bare form. Weight can vary with tire choice and attachments.
Baseline weight
The base 9N tractor, without attached implements or ballast, typically falls in the vicinity of about 1,900–2,000 pounds depending on the exact wheel setup and factory options. This figure serves as the starting point for understanding how much the machine weighs in everyday use.
Weight in common configurations
The following factors commonly influence the operating weight of a 9N in the field. The list below provides typical ranges you may encounter when selecting tires and adding gear.
- Bare tractor weight: approximately 1,900–2,000 pounds (860–910 kg).
- With a small front-end loader: adds about 300–600 pounds (140–270 kg), bringing total to roughly 2,200–2,600 pounds (1,000–1,180 kg).
- With rear attachments (plows, cultivators, harrows) alone: adds roughly 100–500 pounds (45–225 kg), depending on the implement.
- With both a front-end loader and substantial rear implements: total can approach 2,800–3,000+ pounds (1,270–1,360+ kg), depending on the exact equipment and ballast used.
In short, the bare tractor sits near 2,000 pounds, but typical setups with common attachments can push the weight well beyond that, depending on what is fitted and how it is ballasted.
Practical notes for buyers and restorers
For buyers, restorers, or operators, it's important to account for weight when planning tasks, transporting equipment, or adding safety ballast. A 9N's performance and traction are closely tied to its weight distribution and total mass, especially when pulling implements or lifting with a front-end loader. Always consider both the bare weight and the combined weight of all attachments to assess safe operation and transport needs.
Weight considerations by use case
When evaluating a 9N for work or display, weigh the machine with the specific configuration you intend to use. The numbers above are typical ranges; individual units may vary slightly due to production differences, wear, and aftermarket parts.
Summary
The 1940 Ford 9N’s base weight is about 1,900–2,000 pounds. Adding front loaders, rear implements, and ballast can push the total toward 2,200–2,600 pounds for modest setups, and up to 3,000 pounds or more for heavier configurations. Weight varies with tire type, loader size, and attachments, so consider your exact configuration when estimating handling, transport, and safety requirements.
How much does a Ford tractor weigh?
The weight of a Ford tractor varies greatly by model, ranging from under 2,500 pounds for smaller models like the 8N to over 9,000 pounds for larger ones like the EA454C. For example, a Ford 8N typically weighs between 2,400 and 2,800 pounds, while a Ford 3000 is around 3,700 pounds and a Ford EA454C is over 9,400 pounds.
- Ford 8N: 2,400–2,800 pounds
- Ford 3000: Approximately 3,700 pounds
- Ford 2600: 3,475 pounds
- Ford 1500: 2,144–2,305 pounds
- Ford 5000: 5,865 pounds (operating weight)
- Ford EA454C: 9,430 pounds
- Ford 445C: 8,830 pounds
How much is a 9N Ford tractor worth?
The value of a Ford 9N tractor varies significantly based on its condition, ranging from approximately $750 for a non-running model to $2,500 or more for a running or restored one. Factors like location, recent repairs, and the presence of attachments can also influence the final price, with top-condition restored models potentially reaching $4,000 or higher, while a completely non-running tractor in rough shape would be at the lower end of the spectrum.
Price range by condition
- Non-running: $750 to $1,500, depending on the number of salvageable parts and the severity of the issues.
- Running: $1,500 to $2,500, assuming it starts easily and operates without major problems.
- Restored: $2,500 to $4,000+, depending on the quality of the restoration work.
Factors that influence value
- Condition: A tractor that starts, runs well, and has good compression will be worth more than one that doesn't.
- Restoration: A high-quality restoration with new paint and rebuilt components can significantly increase the value.
- Mechanical soundness: The condition of the engine, tires, and hydraulic system are major factors.
- Location: Prices can vary regionally. What is considered a fair price in one area might be different in another.
- Attachments: The presence of useful attachments can add to the value.
- Upgrades: Conversions to 12-volt systems with an alternator can be a plus for some buyers.
How much does a 1948 Ford 8N tractor weigh?
The 1948 Ford 8N tractor weighs approximately 2,410 pounds (1,093 kg) when empty, but this can vary. The operating weight is often listed between 2,410 and 2,717 pounds. The exact weight depends on factors like fluid-filled tires or other added implements.
- Approximate base weight: 2,410 lbs
- Operating weight range: 2,410–2,717 lbs
- Variable factors: Weight can increase with accessories like fluid in the tires.
How much does a 9N Ford tractor weigh?
The ford 9N engine was a side-valve, four-cylinder engine, with a 3.19-inch (81 mm) bore, 3.75-inch (95 mm) stroke, providing a displacement of 120 cubic inches (2,000 cm3). The transmission was the standard three-speed. The finished tractor weighed 2,340 pounds (1,060 kg), and initially sold for US$585.
