What oil does a 2011 Honda Accord Crosstour take?
The Crosstour’s oil comes down to the engine: both the 2.4-liter four-cylinder and the 3.5-liter V6 use 0W-20 synthetic motor oil as the preferred grade, with an approximate total capacity of about 4.8 quarts for the four-cylinder and roughly 5.5–5.7 quarts for the V6. If 0W-20 is unavailable, 5W-20 can be used temporarily, but returns to 0W-20 at the next change. Brand and specification should follow API SN or higher and ILSAC GF-5 (GF-4 is acceptable in older guidance).
The 2011 Honda Accord Crosstour offered two engine choices. This article details the oil grade, capacity, and general brand/interval guidance for each engine so owners can maintain proper lubrication.
Engine options
The Crosstour was available with a 2.4L four-cylinder or a 3.5L V6. Below are the oil guidelines for each engine.
2.4L four-cylinder
Oil guidelines for the 2.4L engine.
- Oil grade: 0W-20 synthetic motor oil (preferred).
- Alternative: 5W-20 if 0W-20 is not available; plan to switch back to 0W-20 at the next change.
- Oil capacity (with filter): Approximately 4.8 quarts (roughly 4.5–5.0 quarts commonly cited).
- Brand and specification: Use oil meeting API SN or higher and ILSAC GF-5 (GF-4 acceptable as a compatibility spec).
- Change interval: Follow the owner's manual; with synthetic oil, typical intervals range about 5,000–7,500 miles depending on driving conditions.
Concluding: The 2.4L Crosstour typically takes around 4.8 quarts of 0W-20 synthetic, with the same brand/spec guidelines applying as for modern Hondas.
3.5L V6
Oil guidelines for the 3.5L engine.
- Oil grade: 0W-20 synthetic motor oil (preferred).
- Alternative: 5W-20 if 0W-20 is not available; revert to 0W-20 at the next change.
- Oil capacity (with filter): Approximately 5.5–5.7 quarts.
- Brand and specification: Use oil meeting API SN or higher and ILSAC GF-5 (GF-4 acceptable historically).
- Change interval: Follow the owner's manual; typical synthetic OCI falls in the 5,000–7,500 mile range depending on driving conditions.
Concluding: The V6 Crosstour uses about 5.5–5.7 quarts of 0W-20 synthetic, with the same API/GF specifications and maintenance practices as the four-cylinder model.
Summary
For the 2011 Honda Accord Crosstour, use 0W-20 synthetic motor oil as the preferred grade for both engines. The 2.4L four-cylinder requires roughly 4.8 quarts, while the 3.5L V6 needs about 5.5–5.7 quarts. If 0W-20 isn’t available, 5W-20 can be used temporarily, but switch back to 0W-20 at the next change. Choose brands that meet API SN or higher and ILSAC GF-5 (GF-4 is acceptable in older guidelines). Always refer to the owner’s manual for the exact interval and capacity for your specific vehicle.
Can I put 5W-30 instead of 5W-20 on a Honda Accord?
You can likely use 5W-30 instead of 5W-20 in your Honda Accord, but you should check your owner's manual first, as the recommended oil can vary by model year and engine. Using a slightly thicker oil is sometimes done for older or high-mileage engines, but it may slightly decrease fuel economy, as the lighter 5W-20 is often specified for better efficiency.
Potential effects of using 5W-30
- Fuel economy: Thicker oil requires more energy to pump, which can lead to a slight reduction in gas mileage.
- Engine performance: Engineers design engines for specific oil viscosities. Sticking to the recommended 5W-20 ensures optimal performance and protection according to the manufacturer's specifications.
- Engine wear: In some cases, using a heavier oil in a high-mileage engine might be beneficial, especially if you're experiencing oil consumption issues. Some mechanics recommend a 5W-30 in older Honda engines to help with this, but it can also increase engine friction if the engine wasn't designed for it.
What to do
- Check your owner's manual: The most important step is to consult your car's owner's manual for the exact oil viscosity recommendation for your specific model and engine.
- Consult a mechanic: If you're concerned about your engine's performance or have a high-mileage vehicle, a mechanic can provide advice tailored to your car's condition.
What type of oil does a 2011 Honda Crosstour take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Capacity: | 4.2 quarts. w/of. After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
What kind of oil does my 2011 Honda Accord take?
Your 2011 Honda Accord takes 0W-20 full synthetic motor oil. This applies to both the 4-cylinder and V6 engines for this model year. The correct oil is crucial for engine performance and protection, and you should always refer to your owner's manual for the most specific guidance.
- Oil Type: 0W-20 Full Synthetic
- Capacity: Approximately 4.2 quarts with a filter change for the 4-cylinder engine, but check your dipstick to confirm the correct level.
- Important Note: It's essential to use 0W-20 synthetic oil, as using a different viscosity like 5W-20 could negatively affect your engine, as it is the recommended oil for this specific model year.
What oil does a Honda Accord Crosstour take?
Mobil 1 – Advanced 0W-20 Full Synthetic Motor Oil, Improves Fuel Economy, 5 Quart (Part No. 44967)
