What oil does a 2014 Ford Fusion take?
The recommended oil for a 2014 Ford Fusion is 5W-20 motor oil. This lightweight, synthetic blend oil helps improve fuel efficiency and provides the necessary lubrication for the engine.
Detailed Explanation
The 2014 Ford Fusion is a midsize sedan that was produced as part of Ford's sixth generation of the Fusion model. Like most modern vehicles, the Fusion requires a specific type of motor oil to ensure proper engine performance and longevity.
According to the owner's manual and Ford's recommendations, the 2014 Ford Fusion should use 5W-20 motor oil. This oil weight provides the right balance of viscosity for the Fusion's engine, allowing it to flow easily when the engine is cold while also maintaining sufficient thickness to protect moving parts when the engine is hot.
The "5W-20" designation refers to the oil's multi-grade properties. The "5W" indicates the oil's cold weather performance, meaning it will flow easily in low temperatures. The "20" refers to the oil's viscosity at normal operating temperatures.
Ford recommends using a high-quality, synthetic blend 5W-20 motor oil to get the best performance and fuel economy from the 2014 Fusion. Synthetic oils tend to provide better protection against wear, sludge buildup, and high-temperature breakdown compared to conventional mineral-based oils.
Key Points:
- Recommended Oil: 5W-20 synthetic blend motor oil
- Oil Weight: The "5W-20" designation indicates the oil's cold weather and high-temperature viscosity properties
- Benefits: Synthetic blend oils provide improved engine protection and fuel efficiency compared to conventional oils
Following Ford's recommended oil specifications is important to maintain the 2014 Fusion's engine performance and warranty coverage. Using the right oil type and changing it at the proper intervals will help ensure the longevity and reliability of this midsize sedan.
How many quarts of oil does a 2014 Ford Fusion with a 2.5 L take?
5.7 qt
How much is an oil change for a 2014 Ford Fusion?
$83 - $102
“Dealer” refers to service centers that specialize in one or two makes and sell those vehicles.
Can I use 5w30 instead of 5w20 in my Ford Fusion?
Can I use 5w30 instead of 5w20 in my Ford? The Ford owner's manual states that 5w20 oil provides the best fuel economy and durability performance for your car's engine. If you use the higher thickness (30 weight), your gas mileage will definitely go down.
Can I use 5W30 instead of 5W20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
What oil do I put in my 2014 Ford Fusion?
Ford Oil Type Recommended by the Manufacturer
In general, Ford recommends SAE 5W-20 or 5W-30 for most of its vehicles. Hybrid vehicles may require 0W-20, which works better at lower temperatures. You can choose another brand of oil, but it must meet Ford's standards for quality.
Are Ford Fusions 4 or 6 cylinder?
Engine, Transmission, and Performance
Powertrain offerings in the Fusion start with a lackluster 175-hp 2.5-liter four-cylinder, a competent six-speed automatic, and front-wheel drive. The six-speed carries over throughout the Fusion's gasoline-powered models.
Can I use 5W30 instead of 5W20 in my Ford Fusion?
Can I use 5w30 instead of 5w20 in my Ford? The Ford owner's manual states that 5w20 oil provides the best fuel economy and durability performance for your car's engine. If you use the higher thickness (30 weight), your gas mileage will definitely go down.
What is a common problem with a 2014 Ford Fusion?
One of the most frequently mentioned issues with the 2014 Ford Fusion is its transmission. Many drivers have experienced problems with shifting gears, sudden jerks, or delayed acceleration, which can be both frustrating and potentially dangerous on the road.
What oil does a 2.5 Ford Fusion take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
What kind of engine is in a 2014 Ford Fusion?
The base engine in the 2014 Fusion is a 2.5-liter engine that makes 175 horsepower and is mated to a six-speed automatic transmission. A turbocharged 1.6-liter EcoBoost engine is available, which produces 177 horsepower (182 with premium gas) and is paired with a six-speed manual transmission.
