What stud pattern are 2017 WRX wheels?
The 2017 Subaru WRX uses a 5x100 bolt pattern.
In more detail, the 2017 WRX sits on Subaru’s Impreza platform and shares a common wheel hub interface with many of Subaru’s models from that era. When shopping for wheels or upgrading, the bolt pattern is the first compatibility check, followed by bore size, offset, and brake clearance. This article breaks down what that 5x100 pattern means and how to verify fitment.
Stud pattern basics for the 2017 WRX
Before listing the key facts, note the essential points that affect wheel compatibility across a wide range of wheels you might consider.
- Five lugs on a 100 mm bolt circle (5x100). This is the standard pattern on the 2017 WRX and many related Subaru models, so most wheels designed for 5x100 will fit in terms of the lug pattern.
- Center bore size around 56.1 mm. Wheels with a larger bore are typically hub-centric with rings to center the wheel on the hub; wheels with a smaller bore will require modifications or may not fit properly.
- Offset and width matter for fitment. The WRX uses wheels designed to maintain proper geometry and clearance; aftermarket options must match or account for offset to avoid rubbing or handling changes.
- Brake clearance is important. The WRX’s braking system requires wheels that clear calipers and rotors; some aftermarket designs may need specific spoke patterns or spoke radii to ensure clearance.
- Compatibility with non-Subaru wheels varies. If you’re considering wheels from another vehicle, confirm the pattern (5x100) and note that wheels from vehicles with different patterns (e.g., 5x114.3) require adapters, which can affect safety and reliability.
Bottom line: If a wheel is 5x100 with a suitable center bore and correct offset, it is a good candidate for the 2017 WRX. Always verify the specific wheel’s dimensions with the manufacturer or a tire/wheel professional before purchase.
Practical fit considerations when upgrading
The following list highlights practical checks to ensure a proper, safe fit for 2017 WRX wheels beyond just the bolt pattern.
- Center bore compatibility. If the wheel bore is larger than 56.1 mm, plan to use hub-centric rings to center the wheel and minimize vibration.
- Offset and width. Confirm the wheel’s offset (ET) and width match or are suitable for the WRX’s suspension and brake setup to avoid rubbing or changes in steering feel.
- Brake clearance. Ensure the wheel design provides sufficient clearance for the front and rear brakes, especially if upgrading to larger or aftermarket rotors and calipers.
- Tire and wheel size pairing. Verify that the chosen wheel diameter and width can accommodate the intended tire size without interference with fenders or suspension components.
- Lug hardware compatibility. Confirm the lug nut size and seat type (and the thread pitch) match the wheel’s lug holes; Subaru wheels commonly use standard lug patterns but always verify with the wheel manufacturer.
Careful verification of bore size, offset, and brake clearance will help ensure a safe, performance-consistent upgrade. If in doubt, consult a wheel-and-tire professional with your vehicle’s year, model, and trim.
Compatibility notes and FAQs
Common questions often arise when mixing wheel sets across models. In short, always confirm 5x100 bolt pattern, 56.1 mm center bore, and the proper offset for your specific WRX trim. When in doubt, rely on manufacturer specifications and a professional fitting.
Summary: For the 2017 WRX, the key requirement is a 5x100 bolt pattern, with a center bore of about 56.1 mm. When selecting wheels, also verify offset, brake clearance, and bore compatibility to ensure a safe, proper fit.
What Subaru has a 5x114.3 bolt pattern?
If you're looking for the latest, most advanced wheels with the 5x114. 3 bolt pattern, 2015 WRX wheels, 2015 STI wheels, 2018 STI wheels, 2020 STI wheels, 2021 STI wheels, and 2022 WRX wheels are all great choices.
What stud pattern is a Subaru WRX?
Notes
| Bolt Pattern | Centerbore | Hardware |
|---|---|---|
| 5x114.3 | 56.1 - hub rings required | 60 deg conical |
What is the bolt pattern for a 2017 Subaru WRX?
The 2017 Subaru WRX has a 5x114.3 mm bolt pattern. Other fitment details include a M12x1.25mm lug thread, a 56.1mm center bore, and a recommended lug torque of 89 ft-lbs.
- Bolt Pattern: 5x114.3 mm (or 5x4.5 inches)
- Lug Thread: M12x1.25 mm
- Center Bore: 56.1 mm
- Lug Torque: 89 ft-lbs
Is WRX 5x114 3?
15+ WRX (VA and VB chassis) are 5x114. 3 .. all the previous WRXs are 5x100 ..
