What oil does a 2014 Subaru XV take?
The 2014 Subaru XV, also known as the Subaru Crosstrek, takes 0W-20 synthetic motor oil. This lightweight, fuel-efficient oil helps the vehicle's engine run smoothly and efficiently.
Detailed Answer
The 2014 Subaru XV, a compact crossover SUV, requires the use of 0W-20 synthetic motor oil. This specific oil grade is recommended by Subaru for this model year to ensure optimal engine performance and fuel economy.
The 0W-20 oil specification means that the oil has a viscosity of 0 at cold temperatures and 20 at normal operating temperatures. This low-viscosity oil helps reduce engine drag, improve fuel efficiency, and provide better cold-weather starting. Synthetic oils also offer superior protection against wear, deposits, and oxidation compared to conventional mineral-based oils.
Subaru's Recommended Oil Specifications
- Oil Type: 0W-20 synthetic motor oil
- Oil Capacity: 4.4 quarts (4.2 liters)
- Oil Change Interval: 6 months or 7,500 miles, whichever comes first
It's important to follow Subaru's recommended oil specifications to ensure the longevity and optimal performance of the 2014 XV's engine. Using the wrong oil type or viscosity grade can lead to increased wear, reduced fuel efficiency, and potential engine damage over time.
Choosing the Right Oil
When selecting 0W-20 oil for your 2014 Subaru XV, look for products that meet the following specifications:
- API (American Petroleum Institute) Service Category: SN or later
- ILSAC (International Lubricant Standardization and Approval Committee) GF-5 or later
- Approved by Subaru for use in their vehicles
Following Subaru's recommended oil guidelines and using the correct 0W-20 synthetic motor oil will help ensure your 2014 XV's engine runs smoothly and efficiently for years to come.
What kind of oil does a 2014 Subaru XV take?
Oil Grade: SM
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
Is it OK to replace 0W-20 with 5W-20 motor oil?
If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used.
Can I use 5W-30 instead of 0W-20 Subaru?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn't available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.
Can I use 5W-30 instead of 0w20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle's engine. Thus, always refer to the manufacturer's recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What kind of oil do I put in a Subaru Crosstrek?
0W-20 synthetic oil
The right Subaru Crosstrek oil type! The recommended Subaru Crosstrek oil type for the most recent generation is 0W-20 synthetic oil.
What kind of oil does a Subaru XV take?
Your Subaru XV will require synthetic oil. Subaru recommends 0W-20 synthetic as the best choice because it improves fuel economy while maximising power. It may be more expensive, but synthetic oil is far better for your engine health, and over the long term will translate into huge savings.
What engine oil does Subaru recommend?
Subaru Oil Guide:
| Model | Subaru Oil Required | Capacity |
|---|---|---|
| Subaru WRX 2011 - 2020 | 5W-30 Synthetic Oil | 4.4 - 5.4 Quarts |
| Subaru Crosstrek 2013 - 2021 | 0W-20 Synthetic Oil | 4.4 - 5.1 Quarts |
| Subaru Crosstrek Hybrid 2014 - 2021 | 0W-20 Synthetic Oil | 4.4 - 5.1 Quarts |
| Subaru Ascent 2019 - 2021 | 0W-20 Synthetic Oil | 4.8 Quarts |
What happens if I use 0w20 instead of 5w30?
Can I use a 0W-20 in my car that recommends 5W-30? No, if your owner's manual calls for a thicker oil, you should not use a thinner SAE grade nor use a thicker oil for a recommended thinner oil vis-grade. Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle's engine.
What type of oil does a 2014 Subaru take?
Whether you're driving a new Crosstrek, another model year, or even the Subaru Crosstrek Hybrid produced from 2014-2021, you will need 0W-20 synthetic oil.
Why does Subaru use 0W-20 oil?
The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
