What oil does a Ford 2.0 TDCi take?
The Ford 2.0 TDCi diesel engine typically requires a 5W-30 fully synthetic engine oil that meets Ford’s specification (commonly WSS-M2C913-C or newer WSS-M2C913-D). The oil capacity is usually around 5.5 to 6.0 liters with a filter. Always check your exact model year and regional manual to confirm the precise specification.
Oil type and specifications
Ford specification codes and what they mean
Across the 2.0 TDCi line, Ford has used a handful of closely related specifications. The most common requirement is a 5W-30 synthetic that meets Ford’s WSS-M2C913-C standard, with many newer vehicles preferring WSS-M2C913-D. Some markets or late-model variants may also reference updated codes. When buying oil, look for the Ford specification on the bottle to ensure compatibility.
- Recommended oil grade: 5W-30 fully synthetic engine oil that meets Ford specification WSS-M2C913-C; newer models may require WSS-M2C913-D.
- Alternative where specified: in some regions or climates, 5W-40 synthetic oil that also meets Ford’s spec can be used, but always confirm the exact code for your vehicle.
- Common capacity: approximately 5.5–6.0 liters of oil, plus a new oil filter, depending on the precise engine variant and whether an oil cooler is present.
Before listing the typical options, note that exact requirements can vary by year, market, and engine variant. The items below reflect the most commonly accepted baselines for modern 2.0 TDCi engines.
In short, the standard practice for most Ford 2.0 TDCi engines is 5W-30 synthetic oil designed to meet Ford’s M2C913-C/D specification, with potential allowances for 5W-40 in certain cases. Always verify with your owner’s manual or a Ford dealer for your specific year and model.
Maintenance and service tips
How to verify the correct oil for your vehicle
To avoid mismatches that can affect performance and emissions, verify the exact oil specification in your vehicle’s manual or via your dealership. If you’re unsure, bring the oil cap or the manual’s specification page to a qualified mechanic or Ford service center for confirmation.
- Always use a quality synthetic oil that meets the Ford spec (M2C913-C or -D, as applicable).
- Do not use mineral or conventional oil in engines that require synthetic Ford-spec oil.
- Ensure the oil capacity is correctly measured after a full drain and filter change, typically around 5.5–6.0 liters for most 2.0 TDCi variants.
- Replace the oil filter when changing oil to ensure proper filtration and system pressure.
- Consider the service interval recommendations in the manual; synthetic oils often support longer intervals than conventional oils, depending on driving conditions.
Before you perform any service yourself, confirm these steps with the manual or a professional.
Following the manufacturer’s guidance helps protect critical components like the turbocharger, EGR system, and emissions controls while maintaining fuel efficiency and engine longevity.
Summary
For most Ford 2.0 TDCi engines, the standard oil is 5W-30 fully synthetic meeting Ford specification M2C913-C or newer M2C913-D, with an approximate capacity of 5.5–6.0 liters including the filter. Always check your specific model year and market in the owner's manual or with a Ford dealer to confirm the exact oil grade, specification, and capacity. Using the correct Ford-approved oil is essential for optimal performance and longevity of the diesel engine.
What kind of oil does a 2016 Ford Focus 2.0 Tdci take?
Only use fluid that meets Ford specifications. If you are unable to find an engine oil that meets the specification defined by WSS-M2C950-A, it is acceptable to use a SAE 5W-30 engine oil that is defined by ACEA A5/B5.
What kind of oil does a Ford S Max 2.0 Tdci take?
Castrol 5W30
6 Litres Of Castrol 5W30 Engine Oil.
Can you use 5W-30 instead of 5W-20 in a Ford Focus?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
Is 5W-30 oil ok for diesel?
5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.
