What oil does a Ford Bronco Sport use?
The Bronco Sport generally requires 5W-30 full-synthetic motor oil for its EcoBoost engines. This grade is recommended for typical driving, but you should confirm the exact specification in your owner's manual or on Ford’s official resources for your model year.
The Bronco Sport offers two turbocharged EcoBoost engines (a 1.5-liter and a 2.0-liter). While both engines share the expectation of using a high-quality synthetic oil, the specific viscosity and any climate-related notes can vary by year and market. Always consult the manual to ensure you’re using the correct oil for your vehicle.
Engine oil recommendations
Here are the standard oil grade recommendations for the Bronco Sport's engines.
- 1.5L EcoBoost engine: Use 5W-30 full-synthetic motor oil that meets Ford's specifications for this engine.
- 2.0L EcoBoost engine: Use 5W-30 full-synthetic motor oil that meets Ford's specifications for this engine.
These recommendations cover the most common climate and driving conditions; always check your owner's manual for any engine-specific notes or climate-based exceptions before buying oil.
Other oil maintenance considerations
Beyond choosing the right viscosity, keep these guidance points in mind to maintain engine health and performance.
- Use Ford-approved synthetic oil, such as Motorcraft 5W-30, or an equivalent that meets Ford's specification.
- Follow the vehicle’s oil life monitor and maintenance schedule to determine when an oil change is due; driving conditions can shorten or extend intervals.
- Always replace the oil filter when performing an oil change with an appropriate OEM or OEM-equivalent filter.
- Dispose of used oil and filters at an authorized recycling center in accordance with local regulations.
- Under extreme off-road or heavy-use conditions, consider shorter intervals if the oil life monitor indicates reduced life.
Using the correct grade and following the maintenance schedule helps prevent engine wear and preserves performance, especially when using the Bronco Sport’s off-road features.
Summary
The Ford Bronco Sport typically uses 5W-30 full-synthetic motor oil for both the 1.5L and 2.0L EcoBoost engines. Always verify the exact specification in the owner's manual for your year and region, and use Ford-approved or equivalent oil that meets the manufacturer’s requirements. Adhering to the recommended oil type and regular oil changes is essential for keeping the vehicle running smoothly, whether on city streets or rough terrain.
What kind of oil do you put in a Bronco Sport?
SAE 5W-30 Motorcraft oil
Example: The below image shows that a 2021 to 2024 2.0L EB Bronco Sport vehicle takes SAE 5W-30 Motorcraft oil, has a 5.5-quart capacity, and uses a Motorcraft FL910S oil filter.
Does Ford Bronco need synthetic oil?
When it comes to the Ford Bronco oil type, you're faced with two primary choices: synthetic or conventional. The manufacturer strongly recommends full synthetic oil due to its longer lifespan. Service centers and dealerships typically prefer using full synthetic oil over conventional oil for its benefits.
What oil is recommended for a 2.3 EcoBoost?
Capacities and Specifications - 2.3L EcoBoost
| Name | Specification |
|---|---|
| Recommended motor oil (U.S.): Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil XO-5W30-QSP | WSS-M2C946-A |
| Recommended Motor oil (Canada): Motorcraft® SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12 | WSS-M2C946-A |
How much oil does a Bronco Sport 2.0 take?
The oil capacity for a Ford Bronco Sport 2.0L engine is 5.5 quarts (5.2 liters) when including the oil filter change. It is important to always check your owner's manual for the most accurate and specific information for your vehicle.
- Capacity: 5.5 quarts or 5.2 liters.
- Recommendation: Always verify the exact capacity with your owner's manual, as some variations can exist.
- Post-change: After refilling with oil, be sure to start the engine and then check the oil level to ensure it is correct and that there are no leaks.
